Main range of productModicon TM3 product or component typeDiscrete output module range compatibilityModicon M241Modicon M251Modicon M221Modicon M262 discrete output typeRelay normally open discrete output number16 discrete output logicPositive or negative discrete output voltage240 V AC for relay output30 V DC for relay output discrete output current2000 mA for relay output Complementary discrete I/O number16 current consumption0 mA at 24 V DC via bus connector (at state off)75 mA at 24 V DC via bus connector (at state on) response time10 ms (turn-on)5 ms (turn-off) mechanical durability20000000 cycles minimum load10 mA at 5 V DC for relay output local signalling1 LED per channel (green) for output status electrical connection10 x 1.5 mm² removable screw terminal block with pitch 3.81 mm adjustment for outputs maximum cable distance between devicesUnshielded cable: <30 m for relay output insulationBetween output and internal logic at 2300 V ACBetween outputs at 750 V ACBetween output groups at 1500 V AC markingCE mounting supportTop hat type TH35-15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit height90 mm depth84.6 mm width27.4 mm net weight0.145 kg Environment standardsEN/IEC 61010-2-201EN/IEC 61131-2 product certificationsC-TickCULus resistance to electrostatic discharge8 kV in air conforming to EN/IEC 61000-4-24 kV on contact conforming to EN/IEC 61000-4-2 resistance to electromagnetic fields10 V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-33 V/m 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-31 V/m 2 GHz...3 GHz conforming to EN/IEC 61000-4-3 resistance to magnetic fields30 A/m 50/60 Hz conforming to EN/IEC 61000-4-8 resistance to fast transients2 kV for relay output conforming to EN/IEC 61000-4-4 surge withstand1 kV I/O common mode conforming to EN/IEC 61000-4-5 DC resistance to conducted disturbances10 V 0.15...80 MHz conforming to EN/IEC 61000-4-63 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL) electromagnetic emissionRadiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to EN/IEC 55011Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 230…1000 MHz conforming to EN/IEC 55011 ambient air temperature for operation-10…35 °C vertical installation-10…55 °C horizontal installation ambient air temperature for storage-25…70 °C relative humidity10…95 %, without condensation (in operation)10…95 %, without condensation (in storage) IP degree of protectionIP20 with protective cover in place pollution degree2 operating altitude0...2000 m storage altitude0…3000 m vibration resistance3.5 mm at 5…8.4 Hz on DIN rail3 gn at 8.4…150 Hz on DIN rail3.5 mm at 5…8.4 Hz on panel3 gn at 8.4…150 Hz on panel shock resistance15 gn for 11 ms Packing Units Package 1 Weight0.246 kg Package 1 Height7.500 cm Package 1 width10.500 cm Package 1 Length12.500 cm Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins PVC freeYes
User guideFormatSizeDateAdd to My Documentsprp.document.label.format pdfSize 3.5 MBDate 6/1/20DescriptionThis guide describes the hardware implementation of TM3 digital I/O expansion modules. It provides the parts description, characteristics, wiring diagrams, and installation details for TM3 digital I/O expansion modules.prp.document.label.format pdfSize 2.8 MBDate 12/1/19DescriptionUse this document to:- Install and operate your M251 Logic Controller.- Connect the M251 Logic Controller to a programming device equipped with EcoStruxure Machine Expert software.- Interface the M251 Logic Controller with I/O expansion modules, HMI and other devices.- Familiarize yourself with the M251 Logic Controller features.prp.document.label.format pdfSize 2.1 MBDate 3/1/18DescriptionThis document describes the configuration of the TM3 expansion modules for SoMachine Basic.For further information, refer to the separate documents provided in the SoMachine Basic onlinehelp.prp.document.label.format pdfSize 1.3 MBDate 1/3/18DescriptionThis document describes the configuration of the TM3 expansion modules for SoMachine.CADFormatSizeDateAdd to My Documentsprp.document.label.format zipSize 17.6 MBDate 12/1/15DescriptionThe file includes wiring diagrams for Tested, Validated, and Documented Architectures (TVDA). The wiring diagrams are provided in a *.pdf file, as an EPLAN P8 project archive, and as *.dwg files exported from EPLAN P8.prp.document.label.format zipSize 16.3 MBDate 12/1/15DescriptionThe file includes wiring diagrams for Tested, Validated, and Documented Architectures (TVDA). The wiring diagrams are provided in a *.pdf file, as an EPLAN P8 project archive, and as *.dwg files exported from EPLAN P8.CertificateFormatSizeDateAdd to My DocumentsInstruction sheetFormatSizeDateAdd to My DocumentsChina RoHS declarationFormatSizeDateAdd to My DocumentsDeclaration of conformityFormatSizeDateAdd to My DocumentsEnd of Life InformationFormatSizeDateAdd to My DocumentsEU RoHS DeclarationFormatSizeDateAdd to My DocumentsMarine certificateFormatSizeDateAdd to My DocumentsProduct Environmental ProfileFormatSizeDateAdd to My Documents
- All Languages25
Software and FirmwareLanguage
Software - ReleaseFormatSizeDateAdd to My Documentsprp.document.label.format jspSize 373.8 KBDate 10/15/20DescriptionMSX Configurator is obsolete, it’s replaced by Modicon PLC Configurator.This new web based tool provides more functionalities and ergonomic.Selecting the right PLC and IOs has never been so easy and fast. Save time during design and implementation into your project.To access Modicon PLC Configurator, follow the link: https://www.se.com/ww/en/work/products/industrial-automation-control/tools/modicon-plc-configurator.jsp
- All Languages1
Technical FAQsNo results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(*)8.5 mm/0.33 in. when the clamp is pulled out.
Mounting and ClearanceSpacing RequirementsMounting on a RailIncorrect MountingMounting on a Panel Surface(1)Install a mounting stripMounting Hole Layout
Connections and SchemaDigital Relay Output Module (16-channel)Wiring Diagram (Positive Logic)(*)Type T fuse(1)The COM0 and COM1 terminals are not connected internally.(2)To improve the life time of the contacts, and to protect from potential inductive load damage, it is recommended to connect a free wheeling diode in parallel to each inductive DC load or an RC snubber in parallel of each inductive AC load.(A)Source wiring (positive logic).Wiring Diagram (Negative Logic)(*)Type T fuse(1)The COM0 and COM1 terminals are not connected internally.(2)To improve the life time of the contacts, and to protect from potential inductive load damage, it is recommended to connect a free wheeling diode in parallel to each inductive DC load or an RC snubber in parallel of each inductive AC load.(B)Sink wiring (negative logic)