Willkommen auf der Website von Schneider Electric

Willkommen auf unserer Website.

Land auswählen

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais

Automation Setup *

Lincoln (Nebraska), United States
Req ID:

Beschreibung der Position


Schneider Electric creates connected technologies that reshape industries, transform cities and enrich lives. Our 135,000+ employees thrive in more than 100 countries. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations. Help us deliver solutions that ensure Life Is On everywhere, for everyone and at every moment.  



Great people make Schneider Electric a great company.

An Automation Set-Up sets up, maintains and repairs complex equipment used in the manufacturing of a variety of assemblies.   Automation Set-up has a broad set of job and performance responsibilities with the qualification and independence to operate efficiently and safely with minimal supervisory input or technical support. 

This position performs routine maintenance and statistical process control to meet production requirements, verify replacement tooling for conformance, troubleshoot and make necessary machine adjustments or tooling replacements; stock materials as needed.  Job duties are primarily machine-paced and self-directed.  This position is accountable


  • Read and understand blueprints, visualize small metal parts of various shapes and sizes in three dimensions, perform machine set-up and adjustment, perform SPC control, and stock and restock tools and materials
  • Set dies and forms to required part specifications using blueprints, machine operating specifications, and SPC requirements.
  • Utilize specific machine specifications and weld requirements.
  • Analyze machine, production part, and SPC sources for possible corrective action and must carefully document all adjustments and communicate necessary information.
  • Maintain a clean area according to 5S requirements and ensure waste handling is in compliance with local, state and governmental regulatory requirements.
  • Must have a thorough understanding of the basic parts and working components of automated metal parts forming machines and dies, how they operate, their peculiarities, and how they should be maintained and operated to maximize production quantities and meet all quality requirements.  
  • Maintain pace sufficient to allow Bihler/STM equipment to run continuously
  • Track hourly production counts, troubleshoot and problem-solve operational problems in minor instances and seek proper support in major instances.  Use SPC to monitor and adjust machinery as needed.
  • Meet specified production schedule, achieve productivity goals, document machine performance and SPC conformance.
  • Maintain part quality requirements
  • Maintains regular attendance in accordance with the current Attendance Policy
  • Ability to use measuring instruments.
  • Ability to work safely, use good judgment, and work well around others.
  • Ability to use standard mechanics tools.
  • Ability to read, write and count in order to keep track of inventory.
  • Must have the ability to communicate, including verbal and written English.
  • Ability to enter data into a computer.
  • Overtime may be available and/or assigned to ensure production demand is met. 




  • Education:  High School diploma or G.E.D 

  • Experience: Previous work experience preferred, but not required.

  • Must be able to pass a skills assessment test on reading and writing comprehension, math skills, and mechanical aptitude.

  • Must be able to work :

    • 1st shift: 6:30 a.m. – 2:51 p.m.
    • 2nd shift: 2:30 p.m. – 10:51 p.m. (45 cent shift premium)
    • 3rd shift: 10:30 p.m. – 6:51 a.m.  (51 cent shift premium)







  • Constant standing and walking for an 8 hour shift (15 minute lunch, two 10 minute breaks)
  • Occasional sitting on chair to perform inspection and write documentation
  • Rare neck extension to view computer screens (screens above eye level)
  • Rare neck flexion to utilize measuring gauges and perform visual inspection activities on a small surface plate
  • Occasional full forward reach at waist to just above shoulder height to remove or install tool holders (slides) weighing 5-45 lbs, reposition or guide raw stock through equipment in a small area covered in machine oil mist; exact placement of objects in a small area is required with both hands grasping and holding at less than shoulder width just above shoulder height
  • Occasional unilateral or bilateral forceful hand grasp to remove or install tool holders (slides), reposition or guide raw stock through equipment
  • Occasional bilateral finger pinch and grasp to hold Allen wrenches, screw drivers, brass probes and other miscellaneous hand tools
  • Occasional wrist flexion, supination and pronation to loosen/tighten (torque) bolts for slide removal or tooling changes (estimated hand grip force required is 25-65 lbs).
  • Occasional push/pull force of 20-50 lbs required to push/pull dies from storage racks to carts to Bihler/STM (die weight is approximately 150 lbs).
  • Rare forward flexion of the back while lifting metal bins weighing 9-35 lbs from floor to waist
  • Rare full forward flexion of the back while rolling wire spools weighing 150 lbs approximately 20 feet on the floor
  • Rare loading and pushing of 55 gallon oil drum (450 lbs full) on a four-wheeled barrel cart.  Operator lifts the cart up to load and position the cart and then lowers to four wheels and pushes the barrel cart forward approximately 450 ft.  Initial lift to position barrel onto cart requires approximately 55 lbs force (bilateral) immediately lowering to four wheels and 8-10 lbs pushing force to roll cart.
  • Rare step up on to one-step platform (8-10”) or two-step stepladder\
We seek out and reward people for putting the customer first, being disruptive to the status quo, embracing different perspectives, continuously learning, and acting like owners. We’re recognized around the world for welcoming people as they are. We create an inclusive culture where all forms of diversity are seen as a real value for the company.  See what our people have to say about working for Schneider Electric.  



Let us learn about you! Apply today. 


You must submit an online application to be considered for any position with us. This position will be posted until filled. 


It is the policy of Schneider Electric to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. 


Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such. 


Schneider Electric is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. 

Schedule: Full-time
Req: 006P5S
<script> $(document).ready(function() { $('head').append('<meta name="apple-itunes-app" content="app-id=714825126">'); }); </script>
<!-- Start SmartBanner configuration --> <meta name="smartbanner:title" content="mySchneider"> <meta name="smartbanner:author" content="Schneider Electric SA"> <meta name="smartbanner:price" content="Gratis"> <meta name="smartbanner:price-suffix-apple" content=" - On the App Store"> <meta name="smartbanner:price-suffix-google" content=" - Google Play"> <meta name="smartbanner:icon-apple" content="//lh3.googleusercontent.com/lAVirntKlp63vbntUZvOkMvZI8fE4rIoA5Lwif9M09VxzFhcWE21sTDYqJqOqIPqg4m4=w300-rw"> <meta name="smartbanner:icon-google" content="//lh3.googleusercontent.com/lAVirntKlp63vbntUZvOkMvZI8fE4rIoA5Lwif9M09VxzFhcWE21sTDYqJqOqIPqg4m4=w300-rw"> <meta name="smartbanner:button" content="Download"> <meta name="smartbanner:button-url-apple" content="http://m.onelink.me/e5bff3e5"> <meta name="smartbanner:button-url-google" content="https://app.appsflyer.com/com.schneider.qrcode.tocase?pid=Web&c=Smart_app_bannerAT"> <meta name="smartbanner:enabled-platforms" content="android"> <!-- End SmartBanner configuration --> <link rel="stylesheet" href="[PublicationUrl]/assets-re1/css/smartbanner.min.css" /> <script type="text/javascript" src="[PublicationUrl]/assets-re1/js/smartbanner.min.js"></script>
Ihr Browser ist nicht mehr auf dem neuesten Stand und es bestehen bekannte Sicherheitsprobleme. Möglicherweise werden darüber hinaus nicht alle Bestandteile dieser Website oder anderer Websites dargestellt. Bitte aktualisieren Sie Ihren Browser, um auf sämtliche Funktionen dieser Website zugreifen zu können. Für optimale Funktionalität werden Internet Explorer 9 oder höher empfohlen.


Haben Sie Fragen oder benötigen Sie Hilfe? Wir sind da, um Ihnen zu helfen.