Ask a Question

How to setup RSTP on an Advantys STBNIP2311.

Advantys STB NIP 2311 RSTP Setup
To enable RSTP on an Advantys STB NIP 2311.
Product Line
Advantys STB NIP 2311
First, Log on to the web pages for a STBNIP2311 and Select SETUP. Then in the left-hand menu tree select RSTP. (See graphics below)
In the Parameter window change the STATUS to Enabled. Advanced users can modify the Bridge Priority value to fine-tune the operation of the RSTP protocol.

 NOTE: make sure the Advantys STB NIP 2311 is updated to the minimum firmware version 3.0
Was this helpful?
What can we do to improve the information ?