15956 is replaced by:
Main product or component typeContactor device short nameCT device applicationControl circuit Poles2P [Ie] rated operational current16 A AC-7A pole contact composition1 NO + 1 NC network typeAC control typeRemote control [Uc] control circuit voltage230/240 V AC 50 Hz Complementary network frequency50 Hz [Ue] rated operational voltage250 V AC 50 Hz maximum power2.1 W 250 V AC control signal typeMaintained local signallingColor indicator hold-in power consumption in VA3.8 VA inrush power in VA9.2 VA mounting modeClip-on mounting support35 mm symmetrical DIN rail 9 mm pitches2 height81 mm width18 mm depth60 mm colourGrey mechanical durability1000000 cycles electrical durability30000 cycles, 50 Hz, AC-7C conforming to IEC/EN 6109530000 cycles, 50 Hz, AC-5B conforming to EN/IEC 60947-4-1 connections - terminalsPower circuit : 2 tunnel type terminals 2.5 mm² for flexible cable(s)Power circuit : 1 tunnel type terminals 6 mm² for rigid cable(s)Control circuit : 2 tunnel type terminals 2.5 mm² for flexible cable(s)Control circuit : 2 tunnel type terminals 1.5 mm² for rigid cable(s) product compatibilityAuxiliary contactInterference filterMixed control: impulse/latchedTime delay Environment standardsIEC/EN 61095 product certificationsCCCCEBECIMQVDEEAC noise level30 dB IP degree of protectionIP20 pollution degree2 tropicalisation2 conforming to EN 60947-4-12 conforming to EN 610952 conforming to IEC 1095 relative humidity95 % (55 °C) operating altitude2000 m ambient air temperature for operation-5...60 °C ambient air temperature for storage-40...60 °C Contractual warranty Warranty period18 months
Documents & DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.