Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
View all   Advantys FTB
FTB1DN16CP0 Product picture

FTB1DN16CP0

FTB1DN16CP0 Product picture
FTB1DN16CP0

I/O splitter box FTB monobloc - IP67 - for DeviceNet - 16I

Show more characteristics
The maximum number of products that can be compared is 4. Remove already added products.

  • Main
    range of product
    Advantys FTB
    product or component type
    IP67 monobloc I/O splitter box
    enclosure material
    Plastic
    bus type
    DeviceNet
    input/output number
    16
    discrete input number
    0…16
    discrete output number
    0…16
    structure type
    According to CAN, layer 7
    According to ISO 11898
    According to EN 50325
    Complementary
    [Ue] rated operational voltage
    24 V DC
    maximum supply current
    8 A
    internal current consumption
    120 mA
    discrete input voltage
    24 V
    discrete input voltage type
    DC
    maximum discrete input current
    200 mA
    discrete input logic
    Positive
    product compatibility
    With 2-wire/3-wire sensors
    discrete output voltage
    24 V
    discrete output voltage type
    DC
    discrete output current
    1600 mA
    discrete output type
    Transistor
    sensor power supply
    18…30 V
    reverse polarity protection
    Internal
    switching frequency
    <= 20 Hz
    maximum tungsten load
    10 W
    electrical connection
    1 female connector 7/8" (power OUT)
    1 female connector M12 (bus OUT)
    1 male connector 7/8" (power IN)
    1 male connector M12 (bus IN)
    8 female connectors M12 (sensor or actuator)
    output connection cable size
    0.34 mm², cable length <5 m
    0.75 mm², cable length <10 m
    method of access
    Master/slave
    transmission rate
    500 kbit/s
    transmission support medium
    4 twisted shielded wires
    number of addresses
    1…63
    input/output number of splitter box
    8 I/O + 8 I/O diagnostic
    output overvoltage protection
    Suppressor diode
    protection type
    Short-circuit protection
    input filtering
    1 ms
    control threshold undervoltage
    0…18 V
    status LED
    1 LEDactuator power supply diagnostics:
    1 LEDsensor power supply diagnostics:
    1 LED per channelchannel diagnostic:
    1 LED per channelchannel status:
    2 LEDsbus diagnostic:
    surge withstand
    -1 kV power supply (asymmetrical) conforming to IEC 61000-4-5
    1 kV power supply (asymmetrical) conforming to IEC 61000-4-5
    -1 kV signal (asymmetrical) conforming to IEC 61000-4-5
    1 kV signal (asymmetrical) conforming to IEC 61000-4-5
    0.5 kV ground/PE conforming to IEC 61000-4-5
    0.5 kV power supply (symmetrical) conforming to IEC 61000-4-5
    0.5 kV signal (symmetrical) conforming to IEC 61000-4-5
    operating position
    Any position
    fixing mode
    By 2 screws
    tightening torque
    1.5 N.m for M4 screw(s)
    net weight
    0.45 kg
    Environment
    standards
    IEC 1131-2 Type 2
    product certifications
    CULus
    ambient air temperature for operation
    0…55 °C
    ambient air temperature for storage
    -25…70 °C
    IP degree of protection
    IP67 conforming to IEC 60529
    operating altitude
    0...2000 m
    vibration resistance
    0.35 mm constant amplitude (f= 10…57 Hz) conforming to IEC 68-2-6, FC test
    5 gn constant acceleration (f= 57…150 Hz) conforming to IEC 68-2-6, FC test
    shock resistance
    30 gn for 11 ms conforming to IEC 68-2-27, EA tests
    resistance to electrostatic discharge
    -4 kV in contact conforming to IEC 61000-4-2
    4 kV in contact conforming to IEC 61000-4-2
    -8 kV in air conforming to IEC 61000-4-2
    8 kV in air conforming to IEC 61000-4-2
    resistance to radiated fields
    10 V/m conforming to IEC 61000-4-3
    resistance to fast transients
    -2 kV (power supply) conforming to IEC 61000-4-4
    2 kV (power supply) conforming to IEC 61000-4-4
    -2 kV (signal) conforming to IEC 61000-4-4
    2 kV (signal) conforming to IEC 61000-4-4
    resistance to conducted disturbances
    10 V conforming to IEC 61000-4-6
    Packing Units
    Package 1 Weight
    0.424 kg
    Package 1 Height
    0.700 dm
    Package 1 width
    2.280 dm
    Package 1 Length
    0.710 dm
    Contractual warranty
    Warranty
    18 months
  • View more View less

    Documents

    Language
    • All Languages4
    • English4
    • French3
    • German3
    • Italian3
    • Portuguese3
    • Spanish3
    User guide
    Format
    Size
    Date
    Add to My Documents
    prp.document.label.format pdf
    Size 2.1 MB
    Date 1/09/07
    Description
    None
    Instruction sheet
    Format
    Size
    Date
    Add to My Documents
    prp.document.label.format pdf
    Size 115 KB
    Date 1/10/03
    Description
    None
    CAD
    Format
    Size
    Date
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.