Pin Side View
Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPM contacts type and composition2 C/O [Uc] control circuit voltage110 V DC [Ithe] conventional enclosed thermal current15 A at -40…55 °C status LEDWith control typeLockable test button utilisation coefficient20 % Complementary shape of pinFlat [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to CSA300 V conforming to UL [Uimp] rated impulse withstand voltage4 kV during 1.2/50 µs contacts materialAgNi [Ie] rated operational current15 A at 277 V (AC) conforming to UL15 A at 28 V (DC) conforming to UL15 A at 250 V (AC) NO conforming to IEC15 A at 28 V (DC) NO conforming to IEC7.5 A at 250 V (AC) NC conforming to IEC7.5 A at 28 V (DC) NC conforming to IEC maximum switching voltage250 V conforming to IEC Resistive load current15 A at 250 V AC15 A at 28 V DC maximum switching capacity3750 VA420 W minimum switching capacity170 mW at 10 mA, 17 V operating rate<= 1200 cycles/hour under load<= 18000 cycles/hour no-load mechanical durability10000000 cycles electrical durability100000 cycles for resistive load Average coil consumption0.85 W drop-out voltage threshold>= 0.1 Uc DC Operate time20 ms at nominal voltage Release time20 ms at nominal voltage Average coil resistance13440 Ohm at 20 °C +/- 10 % rated operational voltage limits88...121 V DC protection categoryRT I test levelsLevel A group mounting operating positionAny position pollution degree3 safety reliability dataB10d = 100000 net weight0.036 kg device presentationComplete product Environment dielectric strength1500 V AC between contacts with micro disconnection2000 V AC between coil and contact with reinforced2000 V AC between poles with basic standardsCSA C22.2 No 14EN/IEC 61810-1UL 508 product certificationsULEACCSAREACHRoHS ambient air temperature for storage-40…85 °C ambient air temperature for operation-40…55 °C vibration resistance3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating Degree of protection (Housing only)IP40 conforming to EN/IEC 60529 shock resistance15 gn for in operation30 gn for not operating Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsCADFormatSizeAdd to My Documentsprp.document.label.format zipSize 74.4 KBDate 12/09/07CertificateFormatSizeAdd to My Documentsprp.document.label.format zipSize 1,017.6 KBDate 22/02/13prp.document.label.format htmSize 211 BDate 12/12/12DescriptionCSA Certificate RXM, RHK, RHN, RHZ, RPF in CSA MC225619China RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of Contacts
Durability (inductive load) = durability (resistive load) x reduction coefficient.
Resistive AC loadXSwitching capacity (kVA)YDurability (Number of operating cycles)
Reduction coefficient for inductive AC load (depending on power factor cos ϕ)YReduction coefficient (A)
Maximum switching capacity on resistive DC loadXVoltage DCYCurrent DC
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.