Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Door Closing Mechanisms

9423 - Door Closing Mechanisms are designed for use on single or multi door enclosures.

The door-closing mechanisms may be used on enclosures with door openings up to 91 inches.

Door Closing Mechanisms
  • Features

    Designed to be used on control enclosures and interlocked with a Class 9422 disconnect device, although they all can be used independently
     
    Door Closing Mechanisms are designed for use on single- or multi-door enclosures
     
    Three different systems are available for flexibility and their recommended use are as follows
     
    Two-point locking is standard
    ·         60” maximum door opening
     
    A third roller latch kit is available for 3-point locking
    ·         For ¾ in. door depths
    ·         46-60” door opening
    ·         For use on single- or multi-door enclosures
    ·         For use with doors hinged on right or left side
     
    Referred to as the 6 in. vault mechanism
    ·         For ¾ in. door depths
    ·         61-91” door opening
    ·         For use on single- or multi-door enclosures
    ·         For use with doors hinged on right or left side
    ·         Referred to as the 8 in. vault mechanism
    ·         For 1-1/8 in. door depth
     
    A complete system is available for interlocking all the doors of a multi-door enclosure with the master door when using the 6” or 8” vault handle mechanism
    ·         Master door is the door of a single or multi-door enclosure which is interlocked directly with the disconnect device
    ·         Master door can be hinged on either the right or left hand side and can be located in any position on a multi-door enclosure
    ·         Auxiliary Door is defined to the be remaining door(s) of a multi-door enclosure which is(are) interlocked with the master door by means of the overhead interlocking systems
     
    UL and CSA 
     

    Benefits

    Door Closing Mechanisms are designed for use on single- or multi-door enclosures.
    They can be used on control enclosures and interlocked with a Class 9422 disconnect device, or used independently.

     

    Applications

    Control Panels
    Manufacturing

Reach Us

Have a question, complaint or is there some feedback you’d like to send us to make your experience with Schneider Electric better?

Where to Buy

A simple tool to locate easily your nearest Schneider Electric distributor

FAQ's

Start here for access to our Knowledge Base to get answers to over one hundred thousand questions online in seconds.
Compare products: /