Canada (Français)
Bienvenue sur le site Web de Schneider Electric

Bienvenue sur notre site Web.

Vous pouvez choisir un autre pays pour voir les produits disponibles ou vous rendre sur le Global website pour obtenir des informations sur l'entreprise.

Choisissez un pays ou une région
Tout afficher Modicon Momentum
Image

171CCC78010

Image
171CCC78010

M1/M1E processor adaptor - 2 Modbus - 32 MHz

Afficher plus de caractéristiques
Ajouter à Mes produits Retirer de Mes produits
Le nombre maximal de produits pouvant être comparé est de 4.

  • Principal
    gamme de produits
    Plateforme d'automatisme Modicon Momentum
    fonction produit
    Adaptateur pour processeur M1/M1E
    désignation du logiciel
    Concept V2.6
    Modsoft >= V2.5
    ProWORX NxT V2.0
    ProWORX 32
    protocole du port communication
    Modbus
    Type du processeur
    Base X 86 (INTEL, AMD)
    fréquence d'horloge
    32 MHz
    Complémentaire
    capacité de gestion des E/S TOR
    8192 E/8192 S
    type de mémoire
    512 Ko flash
    512 Ko RAM
    type de mémoire
    Mémoire programme 18 Ko LL984
    Mémoire programme 240 Ko IEC
    Données 24 Ko
    matière
    Lexan
    longueur du mot
    16 bit
    [Us] tension d'alimentation
    5,0 V DC +/-5 %
    alimentation
    Par base d'E/S Momentum
    temps exact pour exécuter une instruction de 1 kilo
    1 ms
    capacité processeur d'enregistrement E/S
    26048 I/26048 O
    capacité processeur limite E/S
    Local d'E/S sur Modbus
    nombre de ports
    1 RS232C non isolé
    1 RS485
    marquage
    CE
    poids
    0,042 kg
    Environnement
    traitement de protection
    TC
    température de fonctionnement
    0…60 °C
    température ambiante pour le stockage
    -40…85 °C
    humidité relative
    5…96 % sans condensation
    altitude de fonctionnement
    2000 m
    tenue aux chocs mécaniques
    <= 15 gn en crête 11 ms acceleration sur 1/2 sinusoïde
    tenue aux vibrations
    0,75 mm d.a
    1 gn
    certifications du produit
    NEMA type 250
    CUL
    UL
    FM class 1, division 2
    Garantie contractuelle
    Garantie
    18 months
  • Afficher plus Afficher moins

    Documents

    Langue
    • Toutes les langues2
    • français1
    • anglais1
    Guide d'utilisation
    Format
    Taille
    Date
    Ajouter à Mes Documents
    171CCC... / 171CCS... Module processeur et module optionnel M1 (Version 05)
    Description
    Ce guide contient les informations complètes concernant les modules processeurs M1, les modules optionnels et les modules Ethernet de la famille Momentum. Il ne contient pas d'informations concernant les embases d'E/S ou les modules de communication de la famille Momentum.
    Taille pdf
    Taille 3.7 MB
    Date 10-04-01
    Description
    Ce guide contient les informations complètes concernant les modules processeurs M1, les modules optionnels et les modules Ethernet de la famille Momentum. Il ne contient pas d'informations concernant les embases d'E/S ou les modules de communication de la famille Momentum.
    171CCC... / 171CCS... M1 Processor Adapter and Option Adapter (Version 10)
    Description
    This manual contains complete information about the Momentum M1 processor adapters, option adapters and Ethernet adapters. It does not contain information about Momentum I/O bases or communication adapters.
    Taille pdf
    Taille 3.6 MB
    Date 10-04-01
    Description
    This manual contains complete information about the Momentum M1 processor adapters, option adapters and Ethernet adapters. It does not contain information about Momentum I/O bases or communication adapters.
  • Afficher plus Afficher moins

    Logiciels et Firmware

    Langue
    • anglais2
    Firmware - mises à jour
    Format
    Taille
    Date
    Ajouter à Mes Documents
    171CCC78010 Momentum M1 IEC Exec.(8/2008) (Version 2.11)
    Fichiers dans le document
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    Description
    ****IEC Exec. v.2.11 Reference Resolution - TBD 1) Exec version 2.11 did not allow OFS to access Concept IEC unlocated variables. 2) An xxmit Function Block may fault with an error 150 if the xxmit block is active (powered) while the 171CBB97030 is powered cycled. ****IEC Exec. v.2.10 Released with Concept 2.6 SR2 ****IEC Exec. v.2.08 Reference Resolution #8089 1) A 40xxx register may get set to zero when the M1 is put into Run mode. 2) An M1 may crash after a start command if used with a 172JNN21032 Option Adapter. Use file m1iv208e.bin for Concept 2.5 SR2 & Concept 2.6 ONLY. ****IEC Exec. v.2.07 (Not Released) ****IEC Exec. v.2.06 Reference Resolution #1186 1) Minimum Exec. required for M1 171CCS76000 processors at PV02. 2) Exec changed so the battery low coil only indicates that the memory battery backup voltage is <2.68 volts and should be changed within 30 days. It will not cause the processor to go into a not configured state at power up as in earlier Exec. revisions. For Concept 2.1 B2.1, use file m1iv206b.bin For Concept 2.2 SR2, use file m1v206c.bin For Concept 2.5 SR2, use file m1iv206d.bin
    Taille zip
    Taille 1.4 MB
    Date 05-01-04
    Fichiers dans le document
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    bin
    240 KB
    Description
    ****IEC Exec. v.2.11 Reference Resolution - TBD 1) Exec version 2.11 did not allow OFS to access Concept IEC unlocated variables. 2) An xxmit Function Block may fault with an error 150 if the xxmit block is active (powered) while the 171CBB97030 is powered cycled. ****IEC Exec. v.2.10 Released with Concept 2.6 SR2 ****IEC Exec. v.2.08 Reference Resolution #8089 1) A 40xxx register may get set to zero when the M1 is put into Run mode. 2) An M1 may crash after a start command if used with a 172JNN21032 Option Adapter. Use file m1iv208e.bin for Concept 2.5 SR2 & Concept 2.6 ONLY. ****IEC Exec. v.2.07 (Not Released) ****IEC Exec. v.2.06 Reference Resolution #1186 1) Minimum Exec. required for M1 171CCS76000 processors at PV02. 2) Exec changed so the battery low coil only indicates that the memory battery backup voltage is <2.68 volts and should be changed within 30 days. It will not cause the processor to go into a not configured state at power up as in earlier Exec. revisions. For Concept 2.1 B2.1, use file m1iv206b.bin For Concept 2.2 SR2, use file m1v206c.bin For Concept 2.5 SR2, use file m1iv206d.bin
    171CCC78010 Momentum M1 984LL Exec.(2/26/03) (Version 2.07)
    Fichiers dans le document
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    Description
    Exec. v.2.07 (m1llv207.bin) 1) Fixes a 40xxx register value setting to zero on a start command. Exec. v.2.06 (m1llv206.bin) 1) Minimum Exec. required for M1 171CCS76000 processors at PV02. Exec. v.2.05 (m1llv205.bin) 1) Fixes problem in Exec. v.2.04 where M1 would not go into Run. 2) The processor will not go into a not configured state after a power cycle if a battery low condition exists (less than 2.68 volts). 3) Fixes XMIT Function Block operation over 2-wire RS485. Exec. v.2.04 (m1llv204.bin) EXEC. v.2.04 WILL NOT WORK IN M1 PROCESSORS. Putting a program into Run mode causes the Run LED to flash in a pattern of 4. It has been removed from the Exec. listing. Refer to Resolution #1096. Exec. v.2.03 (m1v203.bin) 1) Allows the I/O Bus to be more tolerant of PCP devices (example:ATV58) on the network. Exec. v.2.02 (m1exv202.bin) 1) Changes the response of 4 bi-directional IO Bases in the event of an output fault 2) Allows IO Bus network fault monitoring. Exec. v.2.01 (m1ev201.bin) 1) Fixes M1 processors failing with stopped error code 4 when doing online programming changes. Exec. v.2.00 (m1exe200.bin) 1) The XMIT function block is included in the exec. 2) Allows ASCII read & write
    Taille zip
    Taille 1.3 MB
    Date 03-02-27
    Fichiers dans le document
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    Description
    Exec. v.2.07 (m1llv207.bin) 1) Fixes a 40xxx register value setting to zero on a start command. Exec. v.2.06 (m1llv206.bin) 1) Minimum Exec. required for M1 171CCS76000 processors at PV02. Exec. v.2.05 (m1llv205.bin) 1) Fixes problem in Exec. v.2.04 where M1 would not go into Run. 2) The processor will not go into a not configured state after a power cycle if a battery low condition exists (less than 2.68 volts). 3) Fixes XMIT Function Block operation over 2-wire RS485. Exec. v.2.04 (m1llv204.bin) EXEC. v.2.04 WILL NOT WORK IN M1 PROCESSORS. Putting a program into Run mode causes the Run LED to flash in a pattern of 4. It has been removed from the Exec. listing. Refer to Resolution #1096. Exec. v.2.03 (m1v203.bin) 1) Allows the I/O Bus to be more tolerant of PCP devices (example:ATV58) on the network. Exec. v.2.02 (m1exv202.bin) 1) Changes the response of 4 bi-directional IO Bases in the event of an output fault 2) Allows IO Bus network fault monitoring. Exec. v.2.01 (m1ev201.bin) 1) Fixes M1 processors failing with stopped error code 4 when doing online programming changes. Exec. v.2.00 (m1exe200.bin) 1) The XMIT function block is included in the exec. 2) Allows ASCII read & write
  • FAQ techniques

    Aucun résultat trouvé.
    Malheureusement, ces FAQ sont indisponibles en raison de problèmes techniques. Veuillez réessayer ultérieurement.
Comparer les produits: /