Tere tulemast ettevõtte Schneider Electric veebisaidile

Võite külastada meie teiste riikide või piirkondade veebisaite või avada meie ülemaailmse veebisaidi.

Valige enda asukoht

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais

Rack Air Removal Unit VX

Value heat removal for high density equipment in NetShelter VX enclosures.

Kuva andmed

Part of Uniflair

The world's first blade-ready heat removal solution.

APC Brand Pildi tuvastamine Schneider Electric
Rack Air Removal Unit VX
  • Toote info

    Densely packed enclosures can overheat IT equipment and cause downtime. High-density enclosures create an environment where traditional air distribution methods are not effective.

    The Air Removal Unit captures exhaust heat, ducting it to the return air plenum and eliminating hot spots. Through automatic fan speed adjustment based on temperature or power consumption, a desired temperature can be set and fans will self-adjust for optimal energy efficiency.

    The Rack Air Removal Unit provides fan redundancy in the event of fan failure, and power redundancy through dual corded input. This space saving product mounts to the back of the enclosure - requiring zero U space.

    Kasulikud omadused

    AgilityFan guards - A safety measure that provides protection from the fan opening by covering the inlet.Mounting frame - Allows unit to be installed on the rear of the rack, leaving valuable rack space for other equipment.AvailabilityPower/temperature controlled fans - Provides two methods for controlling the amount of heat removal from the rack enclosure.Redundant fans - In the event of fan failure, redundant fans will provide increased airflow.ManageabilityCommunications link - Allows for aggregated status and alarm information through one point. Connects up to eight units together for monitoring and control.LED status indicators - Three (3) external status indicator LEDs represent that: utility power is present or the PowerShield is operating on battery; the system is operating as expected and output power is present; and the battery needs to be replaced or has been disconnected.Total Cost of OwnershipDual A-B power inputs - Draws power from the UPS for power protection with dual feeds for redundancy.Total Cost of OwnershipDual A-B power inputs - Draws power from the UPS for power protection with dual feeds for redundancy.