View all Modicon ABE7
connection sub-base ABE7 - for Twido extension - 16 outputs - fusesShow more characteristics
Discontinued on 31 December 2019
End-of-service soon on 31 December 2021
Main range of productModicon ABE7 product or component typePassive discrete I/O sub-base [Us] rated supply voltage24 V DC for controller side24 V DC for sensor/controller side number of channels16 number of terminal per channel2 connections - terminalsScrew type terminals, 1 x 0.09...1 x 1.5 mm² (AWG 28...AWG 16) flexible with cable endScrew type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 12) solidScrew type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 14) flexible without cable endScrew type terminals, 2 x 0.09...2 x 0.75 mm² (AWG 28...AWG 20) flexible with cable endScrew type terminals, 2 x 0.2...2 x 2.5 mm² (AWG 28...AWG 16) solid connector destinationTwido programmable controller Complementary supply voltage limits19…30 V DC (controller side) conforming to IEC 61131-220.4…28.8 V DC (sensor/controller side) conforming to IEC 61131-2 discrete output number16 discrete output logicSource discrete output voltage24 V discrete output voltage typeDC product compatibilityTWDDDO32TKTWDDDO16TK status LED1 LED for power ON1 LED per channel for channel status polarity distribution1 common/16 channels for output short-circuit protection2 A internal fuse, 5 x 20 mm, fast blow (controller side)0.125 A fuse per channel, 5 x 20 mm, fast blow (output circuit) connector typeHE-10 pin number20 pins fixing modeBy clips, mounting on 35 mm symmetrical DIN rail conforming to IEC 60715By screws maximum supply current2 A current per channel0.0032 A switched current100 mA for output circuit maximum current per output common1.6 A voltage drop on power supply fuse0.3 V [Ui] rated insulation voltage2000 V terminals/mounting rails overvoltage categoryII conforming to IEC 60664-1 tightening torque0.6 N.m with flat Ø 3.5 mm screwdriver net weight0.45 kg Environment product certificationsULCSA IP degree of protectionIP2x conforming to IEC 60529 resistance to incandescent wire750 °C conforming to IEC 60695-2-11 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 vibration resistance2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6 resistance to electrostatic discharge4 kV (contact) level 3 conforming to IEC 61000-4-28 kV (air) level 3 conforming to IEC 61000-4-2 resistance to radiated fields10 V/m (80000000…2000000000 Hz) conforming to IEC 61000-4-3 level 3 resistance to fast transients2 kV level 3 conforming to IEC 61000-4-4 ambient air temperature for operation-5…60 °C conforming to IEC 61131-2 ambient air temperature for storage-40…80 °C conforming to IEC 61131-2 pollution degree2 conforming to IEC 60664-1 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
Technical FAQsNo results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV20 / BV20TB
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load
Performance CurvesCurves for Determining Cable Type and Length According to the CurrentLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)Cables ABFT2••••• c.s.a. 0.08 mm2 (AWG 28)
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.