Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLC1D contactor applicationResistive load utilisation categoryAC-1 poles description4P power pole contact composition4 NO [Ue] rated operational voltagePower circuit: <= 690 V AC 25...400 HzPower circuit: <= 300 V DC [Ie] rated operational current80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit control circuit typeDC standard [Uc] control circuit voltage125 V DC auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current10 A (at 60 °C) for signalling circuit80 A (at 60 °C) for power circuit Irms rated making capacity140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-11000 A at 440 V for power circuit conforming to IEC 60947 rated breaking capacity1000 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current520 A 40 °C - 10 s for power circuit900 A 40 °C - 1 s for power circuit110 A 40 °C - 10 min for power circuit260 A 40 °C - 1 min for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-1125 A gG at <= 690 V coordination type 1 for power circuit125 A gG at <= 690 V coordination type 2 for power circuit average impedance1.6 mOhm - Ith 80 A 50 Hz for power circuit [Ui] rated insulation voltagePower circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certifiedPower circuit: 690 V conforming to IEC 60947-4-1 electrical durability0.5 Mcycles 80 A AC-1 at Ue <= 440 V power dissipation per pole10.2 W AC-1 safety coverWith mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsBVDNVCSACCCGLRINAULGOSTLROS (Lloyds register of shipping) connections - terminalsControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit: EverLink BTR screw connectors 1 cable(s) 1…35 mm²flexible without cable endPower circuit: EverLink BTR screw connectors 2 cable(s) 1…25 mm²flexible without cable endPower circuit: EverLink BTR screw connectors 1 cable(s) 1…35 mm²flexible with cable endPower circuit: EverLink BTR screw connectors 2 cable(s) 1…25 mm²flexible with cable endPower circuit: EverLink BTR screw connectors 1 cable(s) 1…35 mm²solid without cable endPower circuit: EverLink BTR screw connectors 2 cable(s) 1…25 mm²solid without cable end tightening torqueControl circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2Power circuit: 8 N.m - on screw clamp terminals - cable 25…35 mm² hexagonal screw head 4 mmPower circuit: 5 N.m - on screw clamp terminals - cable 1…25 mm² hexagonal screw head 4 mm operating time42.5...57.5 ms closing16...24 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability10 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyBuilt-in bidirectional peak limiting diode suppressor control circuit voltage limitsDrop-out: 0.1...0.3 Uc DC (at 60 °C)Operational: 0.75...1.25 Uc DC (at 60 °C) time constant34 ms inrush power in W19 W (at 20 °C) hold-in power consumption in W7.4 W at 20 °C auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA for signalling circuit minimum switching voltage17 V for signalling circuit non-overlap time1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact insulation resistance> 10 MOhm for signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-5…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 4 Gn, 5...300 HzShocks contactor closed: 15 Gn for 11 msShocks contactor open: 10 Gn for 11 ms height122 mm width70 mm depth120 mm net weight1.225 kg Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectiveCompliant
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages10
Technical FAQsNo results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.