Preguntas frecuentes de búsqueda
{"searchBar":{"inputPlaceholder":"Buscar por palabra clave o hacer una pregunta","searchBtn":"Buscar","error":"Por favor, introduce una palabra clave para buscar"}}Is it possible to commission a Lexium SD328A using Lexium CT via CAN ?
No, the commissioning tool Lexium CT does not support connection to Lexium SD328A via CAN.
You must use the RS485 port to connect to the SD328 drives when commissioning the drive with Lexium CT.
Note that it is possible to access and write to the device parameters via the CAN interface, it is just not possible to use Lexium CT commissioning software via CAN.
Rev 2-20-18
You must use the RS485 port to connect to the SD328 drives when commissioning the drive with Lexium CT.
Note that it is possible to access and write to the device parameters via the CAN interface, it is just not possible to use Lexium CT commissioning software via CAN.
Rev 2-20-18
¿Ha sido útil?
Explorar más
Rango:
Explorar más
Rango: