How to get access on ILX2T?

Q: How to get access on ILX2T?

Goals and Symptoms How to get access on ILX2T? Causes and Fixes To write parameters via Modbus TCP, e.g. the control word, the plc must take the access rights before. This happens by writing the value 1 to parameter 282. Attention: This is not necessary if the IOscanning with Unit-ID 255 is used. Legacy KB System (APS) Data: RESL201667 V1.0, Originally authored by PaFr on 03/18/2010, Last Edited by PaFr on 03/18/2010 Related ranges: Lexium ILA, ILE, ILS Julkaistu: Schneider Electric Suomi

Question

Accepted Answer

Goals and Symptoms

How to get access on ILX2T?

Causes and Fixes

To write parameters via Modbus TCP, e.g. the control word, the plc must take the access rights before. This happens by writing the value 1 to parameter 282.

Attention:
This is not necessary if the IOscanning with Unit-ID 255 is used.

Legacy KB System (APS) Data: RESL201667 V1.0, Originally authored by PaFr on 03/18/2010, Last Edited by PaFr on 03/18/2010
Related ranges: Lexium ILA, ILE, ILS

How to get access on ILX2T?

Julkaistu: Schneider Electric Suomi

Tuotteet

Tuki

Yritys

Pikalinkit

Yhteistyökumppanit

Kestävä kehitys
opens new tab

Tapahtumat
opens new tab

Tiedot
opens new tab