{"searchBar":{"inputPlaceholder":"Hae hakusanalla tai kysymyksellä","searchBtn":"Hae","error":"Syötä hakusana"}}
{}

Tervetuloa Schneider Electricin verkkosivustolle

Tervetuloa sivustollemme.
 

Valitse sijaintisi

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Kyllä","noButton":"Ei","feedback":{"title":"Miten voimme parantaa toimintaamme?"},"submitButton":"Lähetä","successMessage":"Kiitos palautteestasi","title":"Oliko tästä apua?","feedbackPercentLabel":"henkilön mielestä tästä oli hyötyä","captcha":{"error":"Valitse valintaruutu"}}}
Hae usein kysyttyjä kysymyksiä

Osisense XC special - How to replace the XR2AA02 screw limit switch having an old label attached

The XR2AA02 screw limit switch having the old label attached, is a collector.



Such switch should be available to order in the existing XR2AA02K* references. If not select the XR2AA03K* having the same primary gearbox (K ratio). Difference between XR2AA02 and XR2AA03 is the contact number. To find the correct reference XR2AA02K*, you have to determine the K ratio. Catalogue info giving the K ratio : Number of turns of input drive shaft = For 6 turns of threaded shaft: 0.4, 0.8, 1.6, 3, 6, 10, 20, 40 or 80.