{}
Following are the difference between XBTZ925 cable and XBTZG925 cable: 1. XBTZ925A and XBTZ925B, in connection with TSX CUSB45 converter, is used for programming HMI terminals: XBT N/R. 2. XBTZG925...
The Steel sheet metal thickness used in Okken switchboard is as listed below: Okken Steel sheet metal thickness Housing Thickness mm Door 2.00mm Rear panels 1.50mm Side panels 1.50mm Roof 1.50mm...
The LRD43xx type of thermal overload relays are directly mounted to the contactors LC1D115 & LC1D150 only. There is no separate mounting kit for the LRD43xx. If a separate mounting is required...
The Temperature Thresholds at which the Cooling Fan of Altistart 48 Soft Starter start and stop is controlled are as follows: 1. Start – Heatsink Temperature > 50°C. 2. Stop – Heatsink Temperature...
Inside of contactor there are moving contact and fixed contact. Contactor works by electromagnet which generated on the coil. Where the coil is made from the winding of the conductor, when given an...
