{"searchBar":{"inputPlaceholder":"Cari berdasarkan kata kunci atau ajukan pertanyaan","searchBtn":"Cari","error":"Masukkan kata kunci pencarian"}}
{}

Selamat datang di Situs Web Schneider Electric

Selamat datang di situs web kami.

Pilih lokasi Anda

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Ya","noButton":"Tidak","feedback":{"title":"Apa yang dapat kami lakukan untuk menjadi lebih baik?"},"submitButton":"Kirim","successMessage":"Terima kasih atas umpan balik Anda","title":"Apakah ini bermanfaat?","feedbackPercentLabel":"orang merasa bahwa ini bermanfaat","captcha":{"error":"Silakan centang kotak"}}}
FAQ Pencarian

Can the 170ENT11001 or 170ENT11002 be used as a replacement for the 170ENT11000?

Issue:
Can the 170ENT11001 or 170ENT11002 be used as a replacement for the 170ENT11000?

Product Line:
Momentum

Environment:
Windows Command Line interface

Resolution:
The 170ENT11002 can be used as a direct replacement for the 170ENT11000 since both products do not have web page access.
The 170ENT11001 can be used as a replacement for the 170ENT11000 however, the set up and configuration of the IP address and communication is quite different. The 170ENT11001 is a 10/100 base-T Ethernet with auto sensing and detection. This Module also supports FDR (Faulty Device Replacement). You must download the user manual for the 170ENT11001 in order to learn how to work with this new module. Many of the configuration steps have changed.