If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Question

Accepted Answer

If using a display remote device, a long reset (>5s) is enough.If using a LED remote device, the configuration SW is mandatory.

If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Diterbitkan untuk: Schneider Electric Indonesia

Produk

Dukungan

Perusahaan

Tautan Cepat

Mitra

Keberlanjutan

Acara

Informasi
opens new tab