{"searchBar":{"inputPlaceholder":"Cari berdasarkan kata kunci atau ajukan pertanyaan","searchBtn":"Cari","error":"Masukkan kata kunci pencarian"}}
{}

Selamat datang di Situs Web Schneider Electric

Selamat datang di situs web kami.
 

Pilih lokasi Anda

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Ya","noButton":"Tidak","feedback":{"title":"Apa yang dapat kami lakukan untuk menjadi lebih baik?"},"submitButton":"Kirim","successMessage":"Terima kasih atas umpan balik Anda","title":"Apakah ini bermanfaat?","feedbackPercentLabel":"orang merasa bahwa ini bermanfaat","captcha":{"error":"Silakan centang kotak"}}}
FAQ Pencarian

How can I activate SNTP in Easergy P3?

You need to set the IP address for your SNTP server under protocol configuration. There are two IP addresses, main and backup. The device will initially connect to the main server and if connection is lost device will automatically connect to the backup server.
 
Jelajahi lebih lanjut
Rentang:
Easergy P3