Indonesia (Bahasa)

Selamat datang di Situs Web Schneider Electric

Selamat datang di situs web kami.

Anda dapat memilih negara lain untuk melihat produk yang tersedia atau membuka situs web Global untuk informasi perusahaan.

Pilih negara atau wilayah lain

 

Thalassa PLA

Polyester floor-standing enclosures

-

Thalassa PLA
  • Fitur

    FS polyester enclosures & accessories

    • Parts of the body, rear panels and doors are made from fiber glass reinforced polyester, moulded by hot compression, RAL7032 colour. Same finish for all surfaces.
    • Bosses for fixation points are moulded.
    • 4 versions of enclosures :
      - Totally closed, IP65.
      - Open bottom and integrated plinth, IP54.
      - Open upper part for ventilation, IP44.
      - Open bottom and plinth, and open upper part for ventilation, IP44.
    • Accessory to upgrade IP44 to IP54.
    • 40 dimensions from 500x500x320mm up to 1500x1250x420mm.
    • 1 door, 500 and 750mm width, and 2 doors, 1000 and 1250mm width.
    • 2 doors enclosures constructed with reinforcement central part.
    • 3 types of panels or doors: plain, ribbed surface for antiflyposting, glazed.
    • Lock or handle with locks, with 2 or 4 action points out of the protected volume.
    • Impact resistance: IK10 for plain and ribbed door version, IK08 for the glazed door.
    • Self- extinguishibility: HB40 classified and 960º test withstanding.
    • Certification of compliance with IEC62208 enclosure standard.
    • Polyester plinth ZA 200 mm, stackable 2x200mm,  for PLA enclosures, closed bottom versions
    • Polyester plinth ZZ 200 mm and 500 mm for PLA enclosures, open bottom versions
    • UL/CUL certification, (depending on the version)
      - NSYPLA- Certified 
      - NSYPLAT, NSYPLAZ and NSYPLAZT- Not certified 

    Enclosures Spare Parts    
    Schneider Electric selected a wide variety of spare parts for your enclosure.  No matter if the enclosure is recently built or has several years, you can have the replacement parts you need.



    Keuntungan

    Floor-standing polyester enclosure

    • No electrical contact risks.
    • Suitable for indoor or outdoor use.
    • Resistant to harsh atmospheres.
    • Can be used in a large temperature range.
    • Easy to machine and the machining does not produce corrosion.
    • Halogen free.
    • Light weight gives an easy installation.
    • Long life lasting without maintenance.
    • Strong against shocks.
    • Version with canopy, for outdoor use, maintaining the quality of the seal.
    • Version with 65mm integrated plinth and open lower part for easy incoming of cables.
    • Large range of dimensions (40 dimensions !).
    • Choice of doors (plain, ribbed anti flyposting surface, glazed).
    • Several possibilities of installation (ground, on plinth, wall).
    • Coupling possibilities thanks to modular dimensions.
    • Locking system is out the protected volume.
    • Abroad number of composition accessories.
    • Mounting plates (metal or insulating material) or chassis for universal use or applications (VDI, modular distribution).
    • Customised service: colour, machining, mounting accessories, change of locks, enhanced depth.
    • Combination of the 4 versions with the 3 types of door and rear door instead of panel.

    Plinths ZM 200 mm

    • Protection against the rise of water - access - cable management

    Aplikasi

    • Energy distribution and Control in Energy Infrastructures, industry markets, installed indoor or outdoor, harsh conditions or environments and to avoid electrical risks.

    Gallery

    • Glazed door & Upper opening for ventilation
    • Horizontal, vertical and depth coupling
    • Polyester floor standing enclosures
    • 200 mm plinth