Indonesia (Bahasa)

Selamat datang di Situs Web Schneider Electric

Selamat datang di situs web kami.

Anda dapat memilih negara lain untuk melihat produk yang tersedia atau membuka situs web Global untuk informasi perusahaan.

Pilih negara atau wilayah lain

 

Aquaflair WC

Water-cooled chillers for large water-cooled applications to be combined with remote dry-coolers, cooling towers, or remote condensers

The all-in-one integrated chilled water solution for data center cooling.

APC Brand Product picture Schneider Electric
Aquaflair WC schneider.label Water-cooled chillers for large water-cooled applications to be combined with remote dry-coolers, cooling towers, or remote condensers
  • Fitur

    Water cooled chillers are designed to offer a complete solution for large mission critical installations. High energy efficiency, complete reliability, and total flexibility guarantee TCO reduction. Optional oil free centrifugal compressors with magnetic bearings ensures energy efficiency and provides optimized proportional control. All of Schneider Electric's Aquaflair Chillers offer low noise impact through the use of large air side exchangers, controlling fan rotation, and compressor insulation and housing. Our advanced controls system constantly monitors set points to guarantee the unit always operates within operating limits and will signal any faults before breakdown occurs. These chillers support a wide range of applications and maximize the availability of Row and Room cooling products to provide a complete heat removal solution.

    Keuntungan

    Availability

    • Quick restart - Full load operation in less than 3 minutes with specific arrangements permits undersizing of the storage tanks
    • Redundant Components - Single points of failure in the system have redundant compononents to maintain availability and reliability.
    • Separate power input - Draws power from the external UPS for mainboards and heaters to monitor and protect the unit even in complete power failure mode (optional)

    Manageability

    • Building Management Systems - Units are designed to work with the most common BMS systems including BACnet and Modbus.
    • Local area network - Creates a shared control between all the available resources for maximum energy efficiency and controlled management of the group during emergency situations
    • Microprocessor controller - Provides proactive control and real-time monitoring via a four line, eighty character, alphanumeric display.
    • Network interface - Provides management by connecting the device directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Management is available via Web browser, Telnet or SSH. Notification features inform you of problems as they occur.

    Total Cost of Ownership

    • Condensing water valves - Reduces water usage
    • Ground source application - Allows energy savings and low environmental impact
    • Quick restart - Full load operation in less than 3 minutes with specific arrangements permits undersizing of the storage tanks
    • Tandem compressors - Quiet and efficient operation of compressors, connected on a common refrigerant circuit for staged capacity control (not available for some models/configuration)

    Serviceability

    • Easy service access - Allows for all serviceable components to be replaced/maintained by easily accessible panels/doors.
    • Operational Service - Allows critical components to be maintained/replaced while the system is in operation.
    • Service monitoring - All the monitoring devices on board the unit allow for preventive maintenance and a check of the working condition of the system while its in operation.

    Gallery