EcoStruxure Power Commission
Software provider setup, test and commission for low voltage switchboard
EcoStruxure Power Commission is comprehensive software to provide strong function for setup, test and commission for low voltage power distribution switchboard
-
Features
With EcoStruxure Power Commission, you will get your electrical smart devices configured and commissioned in the simplest way.
This software automatically discovers your smart devices and let multiple devices connected for easy configuration of smart panels. With EcoStruxure Power Commission, you can generate comprehensive reports as part of Factory Acceptance Test and Site Acceptance Test to replace your heavy manual work. Once the panels are under operation, any change of settings made can be easily identified, and hence maintain a system consistency during the operation and maintenance phase.
Compatible Devices- MasterpactTM NT/NW (IEC and UL) circuit breaker
- MasterpactTM MTZ (IEC) circuit breaker
- CompactTM NSX 100-630 (IEC) circuit breaker
- PowerPactTM H-, J-, and L- frame (UL) circuit breaker
- PowerPactTM M-, P-, and R- frame (UL) circuit breaker
- Compact NS 630b-3200A (IEC) circuit breaker
- Acti 9 Smartlink (Modbus, Ethernet, and SI B)
- Power Meters (PM5100, PM5300, PM5500, iEM3000, and iEM2000 series)
- PowerTag Energy sensors (A9MEM1520, A9MEM1521, A9MEM1522, A9MEM1540, A9MEM1541, A9MEM1542)
- Automatic device discovery
- Graphical representation of Communication architecture
- Communication Test & Report
- Device Check up & Control
- Comprehensive Project report
- Firmware compatibility Matrix
- Firmware Upgrade
- Settings consistency check
- Safe and secure project storage in cloud
PC & Software requirements
Processor- Intel ® CoreTM 2 Duo CPU at 3.00 GHz
RAM - 4 GB
System type- 64 bit / 32 bit
Operating system- Windows 7, Windows 8/8.1 and Windows 10
Google Chrome™ web browser (version 54 or later)
Modbus driver (version 2.13 for 32-bit and version 3.13 for 64-bit)
Benefits
Set-up and Testing- Automatically discover all smart devices in a smart panel and build a project
- Run a communication test and ensure proper wiring
- Generate reports as part of Factory Acceptance test reports
- Multiple devices configuration using the same software reduces setting and commissioning time
- Device checkup to ensure all measurement values are proper and to check the modules connected
- Generate comprehensive project report as part of site acceptance test report
- Identify setting inconsistency of electrical system due to changes during operation, and take necessary corrective actions.
- Schedule maintenance activities based on device status & log reports
- Check firmware compatibility regularly and upgrade the device firmware