Israel

Welcome to the Schneider Electric Israel Website

Welcome to Israeli website.

You can choose another country to view available products or go to our Global website for company information.

Choose another country or region

soft starter for asynchronous motor - ATS01 - 32 A - 460..480 V

Show more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4

  • Main
    range of product
    Altistart 01
    product or component type
    Soft starter
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    device short name
    ATS01
    network number of phases
    3 phases
    [Us] rated supply voltage
    460...480 V - 10...10 %
    motor power hp
    20 hp, 3 phases at 460...480 V
    IcL starter rating
    32 A
    utilisation category
    AC-53B conforming to EN/IEC 60947-4-2
    current consumption
    160 A at nominal load
    type of start
    Start with voltage ramp
    power dissipation in W
    4.5 W at full load and at end of starting
    324.5 W in transient state
    Complementary
    assembly style
    With heat sink
    function available
    Integrated bypass
    supply voltage limits
    414…528 V
    supply frequency
    50...60 Hz - 5...5 %
    network frequency
    47.5...63 Hz
    output voltage
    <= power supply voltage
    [Uc] control circuit voltage
    Built into the starter
    starting time
    Adjustable from 1 to 10 s
    1 s / 50
    10 s / 5
    5 s / 10
    deceleration time symb
    Adjustable from 1 to 10 s
    starting torque
    30...80 % of starting torque of motor connected directly on the line supply
    discrete input type
    Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
    discrete input voltage
    24...40 V
    discrete input logic
    Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
    discrete output current
    2 A DC-13
    3 A AC-15
    discrete output type
    Open collector logic LO1 end of starting signal
    Relay outputs R1A, R1C NO
    discrete output voltage
    24 V (voltage limits: 6...30 V) open collector logic
    minimum switching current
    10 mA at 6 V DC for relay outputs
    maximum switching current
    Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
    Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
    display type
    1 LED (green) for starter powered up
    1 LED (yellow) for nominal voltage reached
    tightening torque
    1.9…2.5 N.m
    0.5 N.m
    electrical connection
    4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
    Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
    4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
    Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
    Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
    4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
    Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
    4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
    4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
    Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
    marking
    CE
    operating position
    Vertical +/- 10 degree
    height
    154 mm
    width
    45 mm
    depth
    131 mm
    product weight
    0.56 kg
    compatibility code
    ATS01N2
    Environment
    electromagnetic compatibility
    Conducted and radiated emissions level B conforming to CISPR 11
    Conducted and radiated emissions level B conforming to IEC 60947-4-2
    Damped oscillating waves level 3 conforming to IEC 61000-4-12
    Electrostatic discharge level 3 conforming to IEC 61000-4-2
    EMC immunity conforming to EN 50082-1
    EMC immunity conforming to EN 50082-2
    Harmonics conforming to IEC 1000-3-2
    Harmonics conforming to IEC 1000-3-4
    Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
    Immunity to electrical transients level 4 conforming to IEC 61000-4-4
    Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
    Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
    Voltage/current impulse level 3 conforming to IEC 61000-4-5
    standards
    EN/IEC 60947-4-2
    product certifications
    B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
    CCC
    UL
    CSA
    C-Tick
    GOST
    IP degree of protection
    IP20
    pollution degree
    2 conforming to EN/IEC 60947-4-2
    vibration resistance
    1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
    1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn for 11 ms conforming to EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
    ambient air temperature for operation
    -10…40 °C (without)
    40…50 °C (with current derating of 2 % per °C)
    ambient air temperature for storage
    -25…70 °C conforming to EN/IEC 60947-4-2
    operating altitude
    <= 1000 m without
    > 1000 m with current derating of 2.2 % per additional 100 m
    Offer Sustainability
    REACh Regulation
    REACh free of SVHC
    Yes
    EU RoHS Directive
    Pro-active compliance (Product out of EU RoHS legal scope)
    EU RoHS Declaration
    Toxic heavy metal free
    Yes
    Mercury free
    Yes
    RoHS exemption information
    China RoHS Regulation
    Circularity Profile
    WEEE
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
    Contractual warranty
    Warranty
    12 months
  • Documents & Downloads

    Language
    • English
    Catalogue
    Date
    Size
    Add to My Documents
    Catalog: Soft starters Altistart 01 (Version 1.0)
    CAD
    Date
    Size
    Add to My Documents
    CAD for ATS01N232RT: soft starter for asynchronous motor - ATS01 - 32 A - 460..480 V (Version 1.0)
    Certificate
    Date
    Size
    Add to My Documents
    ATS01 CSA CERTIFICATE (Version 1.0)
    Date 6/19/18
    Size 65.4 KB
    ATS01 C-TICK certificate of conformity (Version 1.0)
    E184727 UL GENERIC CERTIFICATES (Version 1.0)
    Date 5/31/18
    Size 25.6 KB
    ATS01 EU DECLARATION (Version 1.0)
    Date 4/2/19
    Size 360.8 KB
    Instruction sheet
    Date
    Size
    Add to My Documents
    Instruction sheet - ATS01N2..LU/QN/RT (Version 05)
    End of Life Information
    Date
    Size
    Add to My Documents
    ALTISTART 01, 0.75 – 15 kW, Product End-of-Life Instructions (Version 1.0)
    EU RoHS Declaration
    Date
    Size
    Add to My Documents
    REACh Declaration
    Date
    Size
    Add to My Documents
Nos conseillers sont disponibles pour répondre à vos questions de 8h00 à 18h00 du lundi au vendredi toute l'année.