LC1D18AL
LC1D18AL
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 18 A - 5 V DC coil
Show more characteristics
LC1D18AL has not been replaced. Please contact your customer care centre for more information.
-
Characteristics
Main range TeSysproduct name TeSys Dproduct or component type Contactordevice short name LC1Dcontactor application Motor controlResistive loadutilisation category AC-1AC-3poles description 3Ppower pole contact composition 3 NO[Ue] rated operational voltage Power circuit: <= 690 V AC 25...400 HzPower circuit: <= 300 V DC[Ie] rated operational current 18 A (at <60 °C) at <= 440 V AC AC-3 for power circuit32 A (at <60 °C) at <= 440 V AC AC-1 for power circuitmotor power kW 4 kW at 220...230 V AC 50/60 Hz7.5 kW at 380...400 V AC 50/60 Hz9 kW at 415...440 V AC 50/60 Hz10 kW at 500 V AC 50/60 Hz10 kW at 660...690 V AC 50/60 Hzmotor power HP (UL / CSA) 1 hp at 115 V AC 50/60 Hz for 1 phase motors3 hp at 230/240 V AC 50/60 Hz for 1 phase motors5 hp at 200/208 V AC 50/60 Hz for 3 phases motors5 hp at 230/240 V AC 50/60 Hz for 3 phases motors10 hp at 460/480 V AC 50/60 Hz for 3 phases motors15 hp at 575/600 V AC 50/60 Hz for 3 phases motorscontrol circuit type DC low consumption[Uc] control circuit voltage 5 V DCauxiliary contact composition 1 NO + 1 NC[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947overvoltage category III[Ith] conventional free air thermal current 10 A (at 60 °C) for signalling circuit32 A (at 60 °C) for power circuitIrms rated making capacity 140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1300 A at 440 V for power circuit conforming to IEC 60947rated breaking capacity 300 A at 440 V for power circuit conforming to IEC 60947[Icw] rated short-time withstand current 145 A 40 °C - 10 s for power circuit240 A 40 °C - 1 s for power circuit40 A 40 °C - 10 min for power circuit84 A 40 °C - 1 min for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuitassociated fuse rating 10 A gG for signalling circuit conforming to IEC 60947-5-150 A gG at <= 690 V coordination type 1 for power circuit35 A gG at <= 690 V coordination type 2 for power circuitaverage impedance 2.5 mOhm - Ith 32 A 50 Hz for power circuit[Ui] rated insulation voltage Power circuit: 690 V conforming to IEC 60947-4-1Power circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certifiedelectrical durability 1.65 Mcycles 18 A AC-3 at Ue <= 440 V1 Mcycles 32 A AC-1 at Ue <= 440 Vpower dissipation per pole 2.5 W AC-10.8 W AC-3Front cover Withmounting support PlateRailstandards CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508product certifications CCCCSADNVLROS (Lloyds register of shipping)GLRINAULGOSTBVconnections - terminals Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit: screw clamp terminals 1 cable(s) 1.5…6 mm²flexible without cable endPower circuit: screw clamp terminals 2 cable(s) 1.5…6 mm²flexible without cable endPower circuit: screw clamp terminals 1 cable(s) 1…6 mm²flexible with cable endPower circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible with cable endPower circuit: screw clamp terminals 1 cable(s) 1.5…6 mm²solid without cable endPower circuit: screw clamp terminals 2 cable(s) 1.5…6 mm²solid without cable endtightening torque Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmPower circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2operating time 65.45...88.55 ms closing20...30 ms openingsafety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1mechanical durability 30 Mcyclesmaximum operating rate 3600 cyc/h 60 °CComplementary coil technology Built-in bidirectional peak limiting diode suppressorcontrol circuit voltage limits 0.1...0.3 Uc (-40…70 °C):drop-out DC0.8...1.25 Uc (-40…60 °C):operational DC1...1.25 Uc (60…70 °C):operational DCtime constant 40 msinrush power in W 2.4 W (at 20 °C)hold-in power consumption in W 2.4 W at 20 °Cauxiliary contacts type type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1signalling circuit frequency 25...400 Hzminimum switching current 5 mA for signalling circuitminimum switching voltage 17 V for signalling circuitnon-overlap time 1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contactinsulation resistance > 10 MOhm for signalling circuitcontact compatibility M5compatibility code LC1DEnvironment IP degree of protection IP20 front face conforming to IEC 60529protective treatment TH conforming to IEC 60068-2-30pollution degree 3ambient air temperature for operation -40…60 °C60…70 °C with deratingambient air temperature for storage -60…80 °Coperating altitude 0...3000 mfire resistance 850 °C conforming to IEC 60695-2-1flame retardance V1 conforming to UL 94mechanical robustness Vibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 4 Gn, 5...300 HzShocks contactor open: 10 Gn for 11 msShocks contactor closed: 15 Gn for 11 msheight 77 mmwidth 45 mmdepth 95 mmnet weight 0.49 kgPacking Units Package 1 Weight 0.332 kgPackage 1 Height 0.490 dmPackage 1 width 1.110 dmPackage 1 Length 0.890 dmContractual warranty Warranty 12 months -
View more
Documents
Language- All Languages6
- English6
- Chinese2
CatalogueFormatSizeDateAdd to My DocumentsTeSys catalogue - 2020 - chapter B8 contactors TeSys SK,K, D, SKGC, GC, GY,GF (Version 8.0)DescriptionContactors : TeSys D. Mini contactors, pre cabled reversing contactors : TeSys SK, K Modular (on DIN rail) contactors, dual tariff contactors, impulse relays :TeSys SKGC, GC, GY, GF Accessoriesprp.document.label.format pdfSize 16.1 MBDate 7/22/20DescriptionContactors : TeSys D. Mini contactors, pre cabled reversing contactors : TeSys SK, K Modular (on DIN rail) contactors, dual tariff contactors, impulse relays :TeSys SKGC, GC, GY, GF AccessoriesTeSys - Catalogue 2020 - Innovative and connected solutions for motor starters (Version 10.0)DescriptionReady-to-use motor starters and all components for building specific motor starters ( circuit breakers, contactors, overload relays , accessories ...). This edition includes a presentation of the new TeSys island system. The catalogue can also be downloaded chapter per chapter.prp.document.label.format pdfSize 118.2 MBDate 7/22/20DescriptionReady-to-use motor starters and all components for building specific motor starters ( circuit breakers, contactors, overload relays , accessories ...). This edition includes a presentation of the new TeSys island system. The catalogue can also be downloaded chapter per chapter.CADFormatSizeDateAdd to My DocumentsInstruction sheetFormatSizeDateAdd to My Documentsprp.document.label.format pdfSize 932.9 KBDate 3/1/17End of Life InformationFormatSizeDateAdd to My DocumentsTeSys D Contactors AC 09 to 18A (Version 2.0)DescriptionTeSys D Contactors AC 09 to 18Aprp.document.label.format pdfSize 157.9 KBDate 4/28/16DescriptionTeSys D Contactors AC 09 to 18A