Follow the below steps :
1 - Press the manual transfer button - 25 :
2 - Enter the password by following the instructions on the display.
3 - validate the password by pressing the grey function button - 23 marked on the screen.
LEDs -24 and - 27 flash.
After the transfer, the green LED - 27 goes on.
The load is supplied by Source 2
1 - Press the manual transfer button - 25 :
2 - Enter the password by following the instructions on the display.
3 - validate the password by pressing the grey function button - 23 marked on the screen.
LEDs -24 and - 27 flash.
After the transfer, the green LED - 27 goes on.
The load is supplied by Source 2