Welcome to the Schneider Electric Website

Welcome to our website.

You can choose another country to view available products or go to our Global website for company information.

Select your location
View all Altivar 303
ATV303HU22N4E Product picture Schneider Electric


ATV303HU22N4E Product picture Schneider Electric

Variable Speed drive ATV303 3Ph 400V 2,2 kw

Show more characteristics
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4

  • Main
    range of product
    Altivar 303
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    assembly style
    With heat sink
    component name
    motor power kW
    2.2 kW
    [Us] rated supply voltage
    380...460 V - 15...10 %
    supply frequency
    50...60 Hz - 5...5 %
    network number of phases
    3 phases
    line current
    8.8 A at 380 V, Isc = 5 kA
    7.2 A at 460 V
    apparent power
    5.7 kVA
    maximum transient current
    8.3 A for 60 s
    11 A for 2 s
    power dissipation in W
    65.5 W at nominal load
    speed range
    asynchronous motor control profile
    Quadratic voltage/frequency ratio
    Constant voltage/frequency ratio
    Vector control with/without speed feedback
    electrical connection
    LI1...LI4 terminal 2.5 mm²
    L1, L2, L3, PA/+, PB, U, V, W terminal 2.5 mm²
    LO+, LO- terminal 2.5 mm²
    R1A, R1B, R1C terminal 2.5 mm²
    AO1 terminal 2.5 mm²
    Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
    Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection
    communication port protocol
    IP degree of protection
    IPx2 body
    option card
    Communication card for Modbus TCP
    Reinforced version
    supply voltage limits
    323…506 V
    network frequency
    47.5...63 Hz
    prospective line Isc
    5 kA
    continuous output current
    5.5 A at 4 kHz
    output frequency
    0.5…400 kHz
    nominal switching frequency
    4 kHz
    switching frequency
    2...12 kHz adjustable
    transient overtorque
    170…200 % of nominal motor torque
    regulation loop
    Frequency PI regulator
    motor slip compensation
    Automatic whatever the load
    output voltage
    <= power supply voltage
    tightening torque
    LI1...LI4: 1 N.m
    L1, L2, L3, PA/+, PB, U, V, W: 1 N.m
    LO+, LO-: 1 N.m
    R1A, R1B, R1C: 1 N.m
    AO1: 1 N.m
    Electrical between power and control
    analogue input number
    analogue input type
    AI1 configurable voltage or current 0...10 V, input voltage 30 V max, impedance: 30000 Ohm 20 ms 10 bits
    sampling duration
    AI1: 20 ms analog
    LI1...LI4: 20 ms discrete
    analogue output number
    analogue output type
    AO1 voltage/current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits
    discrete input logic
    Positive logic (LI1...LI4), < 13 V (state 1)
    discrete output number
    discrete output type
    Relay: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
    minimum switching current
    R1A, R1B, R1C 5 mA at 24 V DC
    maximum switching current
    R/L1, S/L2, T/L3: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
    R/L1, S/L2, T/L3: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
    R/L1, S/L2, T/L3: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
    R/L1, S/L2, T/L3: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
    discrete input number
    discrete input type
    (LI1...LI4) programmable as logic input at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm
    acceleration and deceleration ramps
    Linear adjustable separately from 0.1 to 999.9 s
    braking to standstill
    By DC injection
    protection type
    Short-circuit between motor phases: drive
    Overload protection (thermal): drive
    Overvoltage protection: drive
    Undervoltage protection: drive
    Earth fault: drive
    insulation resistance
    >= 500 mOhm 500 V DC for 1 minute
    local signalling
    1 LED (red)drive voltage:
    Four 7-segment display unitsModbus plus status:
    time constant
    5 ms for reference change
    frequency resolution
    Analog input: 0.1...100 Hz
    Display unit: 0.1 Hz
    connector type
    1 RJ45 for Modbus
    physical interface
    RS485 multidrop serial link
    transmission frame
    transmission rate
    4800, 9600 or 19200 bps for Modbus
    number of addresses
    1…247 for Modbus
    number of drive
    31 for Modbus
    operating position
    Vertical +/- 10 degree
    143 mm
    105 mm
    151 mm
    net weight
    1.1 kg
    dielectric strength
    2410 V DC between earth and power terminals
    3400 V AC between control and power terminals
    electromagnetic compatibility
    1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
    Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
    Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
    IEC 61800-5-1
    IEC 61800-3
    product certifications
    pollution degree
    protective treatment
    vibration resistance
    1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
    1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn for 11 ms conforming to EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation conforming to IEC 60068-2-3
    5…95 % without dripping water conforming to IEC 60068-2-3
    ambient air temperature for storage
    -25…70 °C
    ambient air temperature for operation
    -10…55 °C without (with protective cover on top of the drive)
    -10…65 °C with current derating 1.5 % per °C (without protective cover on top of the drive)
    operating altitude
    <= 1000 m without
    1000...3000 m with current derating 1 % per 100 m
  • View more View less


    • All Languages5
    • English5
    • Chinese2
    User guide
    Add to My Documents
    Size pdf
    Size 473.1 KB
    Date 3/7/14
    Size xls
    Size 264 KB
    Date 3/7/14
    Software V1.3
    Size pdf
    Size 932.4 KB
    Date 29/6/12
    Size pdf
    Size 1.5 MB
    Date 29/7/10
    Add to My Documents
    Size PDF
    Size 57 KB
    Date 8/7/13
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Compare products: /