Main rangeTeSys product nameTeSys D product or component typeChangeover contactor device short nameLC2D contactor applicationResistive load utilisation categoryAC-1 device presentationPreassembled, with prewired power connections poles description4P power pole contact composition4 NO [Ue] rated operational voltagePower circuit: <= 690 V AC 25...400 HzPower circuit: <= 300 V DC [Ie] rated operational current25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit control circuit typeAC at 50/60 Hz [Uc] control circuit voltage220 V AC 50/60 Hz auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current10 A (at 60 °C) for signalling circuit25 A (at 60 °C) for power circuit Irms rated making capacity250 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1 rated breaking capacity250 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current30 A 40 °C - 10 min for power circuit61 A 40 °C - 1 min for power circuit105 A 40 °C - 10 s for power circuit210 A 40 °C - 1 s for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit associated fuse rating10 A gG for signalling circuit conforming to IEC 60947-5-140 A gG at <= 690 V coordination type 1 for power circuit25 A gG at <= 690 V coordination type 2 for power circuit average impedance2.5 mOhm - Ith 25 A 50 Hz for power circuit [Ui] rated insulation voltagePower circuit: 690 V conforming to IEC 60947-4-1Power circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certified electrical durability0.8 Mcycles 25 A AC-1 at Ue <= 440 V power dissipation per pole1.56 W AC-1 safety coverWith interlocking typeMechanical mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsLROS (Lloyds register of shipping)GOSTCCCDNVGLRINAULCSABV connections - terminalsPower circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endPower circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endPower circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endPower circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endPower circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endPower circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end tightening torquePower circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmPower circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 operating time12...22 ms closing4...19 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability15 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyWithout built-in suppressor module control circuit voltage limitsDrop-out: 0.3...0.6 Uc AC 50/60 Hz (at 60 °C)Operational: 0.8...1.1 Uc AC 50 Hz (at 60 °C)Operational: 0.85...1.1 Uc AC 60 Hz (at 60 °C) inrush power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C)70 VA 50 Hz cos phi 0.75 (at 20 °C) hold-in power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C)7 VA 50 Hz cos phi 0.3 (at 20 °C) heat dissipation2…3 W at 50/60 Hz auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA for signalling circuit minimum switching voltage17 V for signalling circuit non-overlap time1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact insulation resistance> 10 MOhm for signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-5…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 4 Gn, 5...300 HzShocks contactor open: 10 Gn for 11 msShocks contactor closed: 15 Gn for 11 ms height85 mm width90 mm depth90 mm net weight0.73 kg Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectiveCompliant
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsSize pdfSize 111.5 MBDate 12/7/19DescriptionReady-to-use motor starters and all components for builiding specific motor starters ( ircuit breakers, contactors, overload relays , accessories ...).The catalogue can also be downloaded chapter per chapter.Size pdfSize 12.2 MBDate 15/5/19DescriptionContactors : TeSys D.Mini contactors, pre cabled reversing contactors : TeSys SK, KModular (on DIN rail) contactors, dual tariif contactors, impulse relays :TeSys SKGC, GC, GY, GFAccessoriesSize pdfSize 15 MBDate 6/3/18DescriptionComponents for TeSys D, K, F contactors :_ mechanical & electrical assembling kits for building up advanced motor starters : star-delta, reverser, 2-speed control and also source/load changeover._ parts, as single products : links, interlock, terminals...Many useful tips for optimizing and build up safer assemblies .CADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages13
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.