SpaceLogic Sensors - SLXRH Series Replacement Humidity and Temperature Sensors: Specification Sheet

SLXRH Generation 2 Replacement Humidity Sensors and T2 Series Temperature only or Temperature and Humidity sensors work with SCD2, SHD2 and SHO2 Series Plant Room Sensors (with humidity and temperature options). These sensors use on-board RH sensor and solid state temperature sensors to be used on analog transmitters or protocol models. The sensors are factory calibrated and offered in various configurations based on the end application need. When a replacement is installed into the socket, the reading from the replacement sensor is used. The replacement sensor can subsequently be replaced as needed. SLXRH Series Generation 2 Replacement Humidity Sensors also work with the SLA and SLP Series Living Space Sensors (with humidity option). The SLA and SLP Series sensors use an onboard RH sensor. When a replacement sensor is installed into the socket on the SLA or SLP, the reading from the replacement sensor is used. The replacement sensor can subsequently be replaced as needed.