KatalogasKalbaFormatasDydisDataVartotojo vadovasKalbaFormatasDydisDataEnglishprp.document.label.format pdfDydis 973.7 KBData 20.9.1AprašymasThe present document applies when the modules bear the Ex marking and provides important information forM340-M580 automation system used in Ex zones 2 and 22.It is supplied in English only with ATEX and IECEx certified power supply modules BMXCPS3020H,BMXCPS4022H, and BMXCPS4022S.
Prog. Įrangos - IšleistosKalbaFormatasDydisDataEnglishprp.document.label.format zipDydis 266.6 MBData 14.2.6AprašymasThis modular RTU offer relies on an in-rack M340 module providing RTU protocols (DNP3, IEC60870-5) built-in the Modicon M340 PAC. BMXNOR0200H V1.6 is delivered with Web Designer V2.41. BMXNOR0200H V1.6 release supports the following new features or improvements: - Enhance RTU protocols capabilities for IEC60870-5-101/104: - Support up to 64 connections when BMX NOR works as an IEC60870-5-104 client. - Support to process multiple commands of each point type for per sector in parallel when working as Slave/Server. - Support counter Mode A and Mode B of M_IT_NA. - Support to manage the daylight saving time (DST) bit in time stamp. - Enhance C_DC to restore as "0" after pulse execuation. - Support exclusive IOA within each point type. - Support to specify time quality for backup events after power recover. - Enhance RTU protocols capabilities for DNP3: - Support to generate events on demand regardless of value and state. - Support to clear events in buffer on demand. - Support to send unsolicited messages immediately once there are events recorded. - Support to configure the buffer size of event buffer channel by channel. - Support to send SMS(Short Message Service) with PDU 7 bits and 8 bits. - Support to control delay between RTS signal and data transmission when modem is connected. - Quality and customer focused fixing V1.0/V1.5 customer quality or enhancements feedbacks. - Improve User manual. - Provide Upward compatibility from V1.0/1.5 to V1.6: - Firmware upgrade possible. - Upward compatibility for user Applications from V1.0/V1.5 to V1.6. Web Designer Software V2.41 allows to configure Web HMI services. - Email/SMS service - Datalogging service - custom web pages - animation table - graphics pages