Laipni aicināti Schneider Electric tīmekļa vietnē

Jūs varat apmeklēt mūsu tīmekļa vietni citā valstī vai reģionā vai apmeklēt mūsu globālo tīmekļa vietni.

Atlasiet savu atrašanās vietu

Skatīt visu   Altivar 12
ATV12HU22M3 attēlu etiķete Schneider Electric

ATV12HU22M3

ATV12HU22M3 attēlu etiķete Schneider Electric
ATV12HU22M3

variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink

Rādīt vairāk raksturlielumus
Maksimālais salīdzināmo produktu skaits ir 4. Noņemt jau pievienotās preces.

  • Main
    range of product
    Altivar 12
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    assembly style
    With heat sink
    component name
    ATV12
    quantity per set
    Set of 1
    EMC filter
    Without EMC filter
    built-in fan
    With
    network number of phases
    3 phases
    [Us] rated supply voltage
    200...240 V - 15...10 %
    motor power kW
    2,2 kW
    motor power hp
    3 hp
    communication port protocol
    Modbus
    line current
    14,9 A 200 V
    12,5 A 240 V
    speed range
    1…20
    transient overtorque
    150…170 % of nominal motor torque depending on drive rating and type of motor
    asynchronous motor control profile
    Quadratic voltage/frequency ratio
    Sensorless flux vector control
    Voltage/frequency ratio (V/f)
    IP degree of protection
    IP20 without blanking plate on upper part
    noise level
    50 dB
    Complementary
    supply frequency
    50/60 Hz +/- 5 %
    connector type
    1 RJ45 on front face)Modbus
    physical interface
    2-wire RS 485 Modbus
    transmission frame
    RTU Modbus
    transmission rate
    4800 bit/s
    9600 bit/s
    19200 bit/s
    38400 bit/s
    number of addresses
    1…247 Modbus
    communication service
    Read holding registers (03) 29 words
    Write single register (06) 29 words
    Write multiple registers (16) 27 words
    Read/write multiple registers (23) 4/4 words
    Read device identification (43)
    prospective line Isc
    5 kA
    continuous output current
    10 A 4 kHz
    maximum transient current
    15 A 60 s
    speed drive output frequency
    0,5…400 Hz
    nominal switching frequency
    4 kHz
    switching frequency
    2...16 kHz adjustable
    4...16 kHz with derating factor
    braking torque
    Up to 70 % of nominal motor torque without braking resistor
    motor slip compensation
    Adjustable
    Preset in factory
    output voltage
    200...240 V 3 phases
    electrical connection
    Terminal 5.5 mm², AWG 10 L1, L2, L3, U, V, W, PA, PC)
    tightening torque
    1,2 N.m
    insulation
    Electrical between power and control
    supply
    Internal supply for reference potentiometer 5 V DC 4,75…5,25 V), <10 mA overload and short-circuit protection
    Internal supply for logic inputs 24 V DC 20,4…28,8 V), <100 mA overload and short-circuit protection
    analogue input number
    1
    analogue input type
    Configurable current AI1 0...20 mA 250 Ohm
    Configurable voltage AI1 0...10 V 30 kOhm
    Configurable voltage AI1 0...5 V 30 kOhm
    discrete input number
    4
    discrete input type
    Programmable LI1...LI4 24 V 18...30 V
    discrete input logic
    Negative logic (sink), > 16 V, < 10 V 3.5 kOhm
    Positive logic (source), 0...< 5 V, > 11 V
    sampling duration
    20 ms +/- 1 ms logic input
    10 ms analogue input
    linearity error
    +/- 0.3 % of maximum value analogue input
    analogue output number
    1
    analogue output type
    AO1 software-configurable voltage 0...10 V 470 Ohm 8 bits
    AO1 software-configurable current 0...20 mA 800 Ohm 8 bits
    discrete output number
    2
    discrete output type
    Logic output LO+, LO-
    Protected relay output R1A, R1B, R1C 1 C/O
    minimum switching current
    5 mA 24 V DC logic relay
    maximum switching current
    2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms logic relay
    2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms logic relay
    3 A 250 V AC resistive cos phi = 1 L/R = 0 ms logic relay
    4 A 30 V DC resistive cos phi = 1 L/R = 0 ms logic relay
    acceleration and deceleration ramps
    Linear from 0 to 999.9 s
    S
    U
    braking to standstill
    By DC injection, <30 s
    protection type
    Line supply overvoltage
    Line supply undervoltage
    Overcurrent between output phases and earth
    Overheating protection
    Short-circuit between motor phases
    Against input phase loss in three-phase
    Thermal motor protection via the drive by continuous calculation of I²t
    frequency resolution
    Analog input converter A/D, 10 bits
    Display unit 0.1 Hz
    time constant
    20 ms +/- 1 ms for reference change
    marking
    CE
    operating position
    Vertical +/- 10 degree
    height
    143 mm
    width
    105 mm
    depth
    131,2 mm
    net weight
    1,2 kg
    specific application
    Commercial equipment
    Variable speed drive application selection
    Mixer Commercial equipment
    Other application Commercial equipment
    Ironing Textile
    motor starter type
    Variable speed drive
    Environment
    electromagnetic compatibility
    Electrical fast transient/burst immunity test level 4 EN/IEC 61000-4-4
    Electrostatic discharge immunity test level 3 EN/IEC 61000-4-2
    Immunity to conducted disturbances level 3 EN/IEC 61000-4-6
    Radiated radio-frequency electromagnetic field immunity test level 3 EN/IEC 61000-4-3
    Surge immunity test level 3 EN/IEC 61000-4-5
    Voltage dips and interruptions immunity test EN/IEC 61000-4-11
    electromagnetic emission
    Radiated emissions environment 1 category C2 EN/IEC 61800-3 2...16 kHz shielded motor cable
    Conducted emissions with additional EMC filter environment 1 category C1 EN/IEC 61800-3 4...12 kHz shielded motor cable <5 m
    Conducted emissions with additional EMC filter environment 1 category C2 EN/IEC 61800-3 4...12 kHz shielded motor cable <20 m
    Conducted emissions with additional EMC filter environment 2 category C3 EN/IEC 61800-3 4...12 kHz shielded motor cable <20 m
    product certifications
    GOST
    C-Tick
    CSA
    NOM
    UL
    vibration resistance
    1 gn 13…200 Hz)EN/IEC 60068-2-6
    1.5 mm peak to peak 3…13 Hz) - drive unmounted on symmetrical DIN rail - EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation IEC 60068-2-3
    5…95 % without dripping water IEC 60068-2-3
    ambient air temperature for storage
    -25…70 °C
    ambient air temperature for operation
    -10…50 °C protective cover from the top of the drive removed
    50…60 °C with current derating 2.2 % per °C
    operating altitude
    <= 1000 m without derating
    > 1000...3000 m with current derating 1 % per 100 m
    Offer Sustainability
    REACh regula
    ES RoHS direktīva
    Proaktīva atbilstība (uz izstrādājumu neattiecas ES RoHS juridiskās saistības)
    ES RoHS deklarācija
    Nesatur dzīvsudrabu
    Informācija par RoHS izņēmumiem
    Ķīnas RoHS regula
    WEEE
    Eiropas Savienības tirgū no šī produkta ir jāatbrīvojas, ievērojot noteiktu atkritumu savākšanas kārtību, un produkts nedrīkst nonākt sadzīves atkritumu tvertnēs.
    Contractual warranty
    Garantija
    18 months
  • Skatīt vairāk View less

    Dokumenti

    Valoda
    • Visas valodas17
    • Latviešu9
    • English14
    Katalogs
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format pdf
    Izmērs 3.7 MB
    Datums  19.26.11
    Lietotāja rokasgrāmata
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format pdf
    Izmērs 3.6 MB
    Datums  18.2.7
    prp.document.label.format pdf
    Izmērs 1.8 MB
    Datums  16.29.4
    prp.document.label.format pdf
    Izmērs 162.8 KB
    Datums  16.29.4
    prp.document.label.format pdf
    Izmērs 1.7 MB
    Datums  12.29.6
    Sertifikāts
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format pdf
    Izmērs 456.3 KB
    Datums  16.20.4
    Instrukcijas lapa
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format pdf
    Izmērs 711.5 KB
    Datums  17.31.3
    prp.document.label.format pdf
    Izmērs 516.6 KB
    Datums  11.18.3
    prp.document.label.format pdf
    Izmērs 936.8 KB
    Datums  10.31.3
    prp.document.label.format pdf
    Izmērs 1.3 MB
    Datums  10.15.2
    ES RoHS deklarācija
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    ATV12HU22M3 : variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    Apraksts
    variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    prp.document.label.format pdf
    Izmērs 195.3 KB
    Datums  20.30.5
    Apraksts
    variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    Informācija par ekspluatācijas izbeigšanu
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format pdf
    Izmērs 225.5 KB
    Datums  09.1.3
    Produkta ietekme uz vidi
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format pdf
    Izmērs 921 KB
    Datums  09.1.2
    REACh deklarācija
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    ATV12HU22M3 : variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    Apraksts
    variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    prp.document.label.format pdf
    Izmērs 195.3 KB
    Datums  20.30.5
    Apraksts
    variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    Ķīnas RoHS deklarācija
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    ATV12HU22M3 : variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    Apraksts
    variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
    prp.document.label.format pdf
    Izmērs 195.3 KB
    Datums  20.30.5
    Apraksts
    variable speed drive ATV12 - 2.2kW - 3hp - 200..240V - 3ph - with heat sink
  • Skatīt vairāk View less

    Programmatūra un programmaparatūra

    Valoda
    • Visas valodas2
    • English2
    • Chinese2
    • French2
    • German2
    • Italian2
    • Portuguese1
    • Spanish2
    • Turkish1
    Programmatūra - izdotā versija
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    SoMove (FDT Standalone) (Versija V2.8.1)
    Faili dokumentā
    exe
    326.5 MB
    prp.document.label.format zip
    Izmērs 326.6 MB
    Datums  20.19.3
    Faili dokumentā
    exe
    326.5 MB
    DTM files
    Formāts
    Izmērs
    Datums 
    Pievienot sadaļai Mani dokumenti
    prp.document.label.format zip
    Izmērs 422.7 MB
    Datums  18.2.5
    Faili dokumentā
Salīdzināt produktus: /