{}
Following are the difference between XBTZ925 cable and XBTZG925 cable: 1. XBTZ925A and XBTZ925B, in connection with TSX CUSB45 converter, is used for programming HMI terminals: XBT N/R. 2. XBTZG925...
Yes, but it is mandatory to use A9N26923 since this is compulsory for the addition of tripping or indication auxiliaries on a residual current circuit breaker ID.
1. Which digital input accepts the IRIG-B Signal? Can I set any of the DI to accept IRIG-B? Ans. For IRIG-B, one of your meter s digital inputs must be connected to the IRIG-B network, and the...
The alternative replacement for NS630H with STR23SE trip unit is the new offer Compact NSX new Generation C63H32D630. C63H32D630 Circuit breaker, ComPacT NSX630H, 70kA/415VAC, 3 poles, MicroLogic 2.3...
The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase nominal current up to 1.5In. The Derating...
TSXSCPCM4030 cable is required from TSXSCP114 PCMCIA card to the Modbus branching device TSXSCA50 for connecting other RS485 device on the Modbus Network. In case TSXSCA50 Modbus branching device is...
