{"searchBar":{"inputPlaceholder":"Søk etter nøkkelord, eller still et spørsmål","searchBtn":"Søk","error":"Skriv inn et søkeord"}}
{}

Velkommen til nettstedet til Schneider Electric

Velkommen til nettstedet vårt.

Velg din lokasjon

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Ja","noButton":"Nei","feedback":{"title":"Hva kan vi gjøre for å bli bedre?"},"submitButton":"Send inn","successMessage":"Takk for din tilbakemelding","title":"Var dette nyttig?","feedbackPercentLabel":"av personer syntes dette var nyttig","captcha":{"error":"Huk av i boksen"}}}
Søk i ofte stilte spørsmål (FAQ)

InfraStruXure Manager | Lost Password Recovery Procedure

Please follow these steps in order to reset the password on ISX Manager (Information Controller) version 1.3.4 and earlier:

1) Connect a laptop to the InfraStruXure Manager Hub and make sure it is assigned an IP.
2) Using a paper clip or similar item hit the reset button on the ISX Mgr.
3) Verify that after the reboot you still have a valid IP on the laptop and log onto the IC through the web interface using the following URL:

http://192.168.1.1/ResetUserNameAndPasswordToDefault

Please note that this step MUST be completed within five minutes of the reboot of the ISX Mgr. and it is case sensitive.

At this point the user/password should be reset to apc/apc


On ISX Manager version 4.x:

1) Connect a laptop to the InfraStruXure Manager Hub and make sure it is assigned an IP.
2) Using a paper clip or similar item hit the reset button on the ISX Mgr.
3) Verify that after the reboot you still have a valid IP on the laptop and log onto the ISX Mgr using admin/apc within five minutes of the reboot.
Finn ut mer
Finn ut mer