{}

Merkene våre

Impact-Company-Logo-English Black-01-177x54

Velkommen til nettstedet til Schneider Electric

Velkommen til nettstedet vårt.
Søk i ofte stilte spørsmål (FAQ)
How to resolve the SCADAPack Workbench 6.4 installation error Does not Detect VS2010 SP1?

Work around is the following to resolve the issue in figure 1 below:

1. Run..\Workbench\Prerequisites\VS2010ISO\English\Isolated Mode\setup.exe. When prompted, select remove
2. Run it again, this time go through the full install
3. Run Setup.exe from the root of the DVD and installation SPW

Schneider Electric Norway

Finn ut mer
Rekkevidde:
Artikler som kan være nyttige
Finn ut mer
Rekkevidde: