I changed my IP configuration of IFE to DHCP through Ecoreach, but the device value shows static. What could be wrong here?

Question

Accepted Answer

Once you change the IP configuration to DHCP and transfer the settings to the device, the device gets disconnected and hence shows the earlier value. If the Ecoreach device home page shows the device is still connected, please disconnect and connect again with the right IP address entered in connection parameter.

I changed my IP configuration of IFE to DHCP through Ecoreach, but the device value shows static. What could be wrong here?

Publisert for: Schneider Electric Norway

Produkter

Kundestøtte

Selskap

Hurtigkoblinger

Samarbeidspartnere

Bærekraft

Arrangementer

Innsikt
opens new tab

I changed my IP configuration of IFE to DHCP through Ecoreach, but the device value shows static. What could be wrong here?

Publisert for: Schneider Electric Norway

Produkter

Kundestøtte

Selskap

Hurtigkoblinger

Samarbeidspartnere:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Bærekraft:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Arrangementer:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Innsikt:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Samarbeidspartnere

Bærekraft

Arrangementer

Innsikt
opens new tab