How to Connect Accutech BR20 to Wired Output Module
There are 3 possible part numbers for the Acute wired output module:
TBUM297526 - 4AO: 4 Channel Analog Output Module (4-20mA)
TBUM297527 - 8SW: 8-Point Switch Closure Output Module
TBUM297528 - 4AO-8SW: Channel Analog Output (4-20mA) & 8-Point Switch Closure Output Module
To be able to configure any of the above models with the BR20 Accutech Base Radio, a RS-485 connection must be used. Accutech Manager is used to configure the modules where outputs of Accutech Wireless field units can be mapped to the module. For initial set-up the part number TBUM297569 (USB Programming Cable) can be used.
TBUM297526 - 4AO: 4 Channel Analog Output Module (4-20mA)
TBUM297527 - 8SW: 8-Point Switch Closure Output Module
TBUM297528 - 4AO-8SW: Channel Analog Output (4-20mA) & 8-Point Switch Closure Output Module
To be able to configure any of the above models with the BR20 Accutech Base Radio, a RS-485 connection must be used. Accutech Manager is used to configure the modules where outputs of Accutech Wireless field units can be mapped to the module. For initial set-up the part number TBUM297569 (USB Programming Cable) can be used.
Publisert for: Schneider Electric Norway
Trenger du hjelp?
Produktvelger
Velg riktige produkt og kompatibelt tilbehør raskt og enkelt.
Be om tilbud
Start din salgsforespørsel online, og vi vil kontakte deg.
Hvor kan du handle?
Finn din nærmeste Schneider Electric-distributør enkelt.
Hjelpesenter
Finn alle nødvendige supportressurser samlet på ett sted.