FAQs

Ask a Question

Filter results

Clear
How can we use the M221 to read UINT32 and FLOAT32 data types out of a Power meter PM5300?
Symptoms: If you use the READ_VAR at address 130 with quantity = 1 you will get an error : CommError = 254 and OperError = 3. If you change the quantity...
What is the full name of the abbreviation 'STR' trip unit ? .
 The abbreviation 'STR' has a very old origin. The first generations of trip units were called Statimax and 'STR' refers to "Statimax Trip Release".
What is part number for 4 pole, 80A contactor , 220V DC Coil?
The part number for 4 pole, 80A contactor , 220V DC Coil is LP1D80008MD. This Contactor is AC-1 rated only (Slightly Inductive Loads/resistive loads)....
What causes E-17 fault on an ATV21 / ATV212 series drive?
Issue: What causes E-17 fault on an ATV21 / ATV212 series drive? Product Line: ATV21 and ATV212 series drives Environment: All models, All serial...
Is there a PDL 56SW120 with a neon indicator?
Not built as a standard product but you can use a PDL56LEDK1 to add an LED indicator to any 56 series switch.  
What are the dimensions for the new PDL DBF60 and DBS60 distribution boards?
DBF60 Board Size - 376w x 800h x 100d   Hole size - 335w x 765h x 80d inc wallboard DBS60 Board Size - 376w x 800h x 115d    Hole size - N/A  
What are the dimensions for the new PDL DBF45 and DBS45?
DBF45 Board Size - 376w x 666h x 100d   Hole Size - 335w x 631h x 80d inc wallboard DBS45 Board Size - 376w x 666h x 115d   Hole Size - N/A  
What are the dimensions for a PDL DBF10?
Board Size - 286w x 258h x 100d Hole Size - 246w x 223h x 80d inc wallboard  
What is the part code for a large format twin socket in the Prestige Series?
The part code for a Twin Switch Socket Outlet is P2025/2  
What are the dimensions for a PDL Thermosafe heater?
PDL no longer supplies the Thermosafe range, or any heating appliances. 255 x 362 is the cutout size for the flush mount box. See attached pdf for...
Results 1 - 10 of 100