Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais

Easergy MiCOM P532

Line Differential Protection and Bay Control Device

Easergy MiCOM P532 provides a two-ended line differential protection function with all of the necessary protection communication interfaces.

Easergy MiCOM C434
  • Features

    The Easergy MiCOM P532 is an inexpensive line differential protection device that features optional control functions for rapid and selective short-circuit and overload protection of cables and power lines. It provides a rapid three-stage differential protection system using a tripping characteristic with multiple knee points amongst the numerous supplementary functions. The optional control functions enable MiCOM P532 to control up to six switchgear units fitted to a bay panel, and to monitor their contact positions.

    MiCOM P530C is a compact line differential protection device which can directly replace the PQ741. It is provided with more new features and functions than its predecessor but is still pin-compatible with the PQ741. A multitude of additional protection functions for short-circuit and overload protection are implemented so that the relay doubles as feeder protection. Directional overcurrent functions, ground fault detection and voltage supervision are available when using the optional three-phase voltage measurement.

    Both IEDs supports numerous communications protocols, which allow the devices to be wired into various substation control systems and telecontrol systems. The freely configurable PCOMM protection interface permits differential protection communication to also be used for transmission of up to three binary information telegrams between devices.

    Easergy MiCOM P532 is supplied in 40TE or 84TE standard 4U case sizes, depending on configuration, whereas MiCOM P530C is supplied in a compact case solution.

    Latest communication protocols and Ethernet redundancy
    Easergy MiCOM P532 is fully equipped with the latest communications protocols (IEC 61850 Ed1 and Ed2 available in the same device, selection by setting). Maximum availability and reliability of Ethernet communications is possible thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure. To an extent the compatibility Easergy MiCOM P532 offers the RSTP redundancy protocol as well. All redundancy protocols are available in the same device and can be selected by setting. Implemented VLAN and port assignment functionality allows the use of advanced network architectures by splitting, the physical network into a logical SCADA system network and maintenance network.

    Major enhancement to cybersecurity

    Easergy MiCOM P532 has operational and cybersecurity features, compliant with IEC 62351, that help protect installations with security based on embedded features such as role based access control (RBAC), port hardening, security logs and access traceability. The IED, by default, includes RBAC with different users defined and a security administrator

    Standard Manufacturer’s Warranty: 2 years 
    Extended Warranty: Up to 10 years (product registration required, applies to Easergy MiCOM, please check with your local representative for availability, some exclusions apply).


    Benefits

    ·  Comprehensive and advanced range of protection functions - standardized, yet scalable to meet many system requirements
    ·  Flexible case mounting options suitable for wall, flush/panel or rack mounting
    ·  Modular hardware options for simple adaptation to specific application requirements
    ·  Optional voltage transformers
    ·  Optional feeder management included
    ·  Freely configurable PCOMM interface
    ·  Function keys (with text HMI)
    ·  Flexible case mounting options suitable for wall, flush/panel or rack mounting
    ·  Advanced one-box solution and bay control available
    ·  Latest IEC 61850 communication features
    ·  Advanced cybersecurity features
    ·  Bay template library

    Applications

    The Easergy MiCOM P532 is an inexpensive range of line differential IEDs that features optional control functions for rapid and selective short-circuit and overload protection of cables and power lines.

    2 Versions of P532 are available:

    • Non-directional supplementary functions (without voltage transformers)
    • Directional supplementary functions and ground fault monitoring (with voltage transformers)

    Furthermore, where provided, there are additional options for controlling switchgear units or the automatic synchronization check (ASC) function.

    Gallery

    • Easergy MiCOM Px30 - 84TE  - Text HMI
    • Easergy MICOM Px30 40TE - Text HMI
    • Easergy MiCOM new HMI - 84TE - Graph HMI
    • Easergy MiCOM new HMI - 40TE - Graph HMI

EcoStruxure™ for Your Business

EcoStruxure lets you thrive in today's digital world. Make better business decisions with scalable and converged IT/OT solutions.

Reach Us

Have a question, complaint or is there some feedback you’d like to send us to make your experience with Schneider Electric better?

FAQ

Easily find and share the answer you are looking for from our online FAQ service.