DISCLAIMER
The example below is intended to demonstrate one or more features or methods and is presented as a configuration example only. Schneider Electric assumes no liability for the use or application of this example or any portion thereof.
Some customers may want to remove the standard Mimic name from the bottom of the WebX page:
This can be done by editing the "applet.xsl" file, located at "C:\Program Files\Schneider Electric\ClearSCADA\WWW\XSL". Locate and delete the following lines:
You may need to clear the browser cache to see the changes:
Note: Any changes on the original WebX files will be overwritten by an upgrade. You may want to save the modified files on a safe place so you can reuse them after an upgrade.
The example below is intended to demonstrate one or more features or methods and is presented as a configuration example only. Schneider Electric assumes no liability for the use or application of this example or any portion thereof.
Some customers may want to remove the standard Mimic name from the bottom of the WebX page:
This can be done by editing the "applet.xsl" file, located at "C:\Program Files\Schneider Electric\ClearSCADA\WWW\XSL". Locate and delete the following lines:
You may need to clear the browser cache to see the changes:
Note: Any changes on the original WebX files will be overwritten by an upgrade. You may want to save the modified files on a safe place so you can reuse them after an upgrade.