Välkommen till Schneider Electrics webbplats

Välkommen till vår webbplats.

Du kan välja ett annat land för att se tillgängliga produkter eller gå till vår globala webbplats för information om företaget.

Välj ett annat land eller region


Ecofit reläskydd

MV self powered protection solution for replacement of old protection relays


Ecofit reläskydd
  • Funktioner

    This offer is designed to answer all the possible installations due to site RM6+ installation constraints with only 1 reference. Type tested in a COFRAC certified laboratory for >Electro-Magnetic Compatibility>Mechanical = Choc, Mechanical vibration, Signe Sweep Seismic Reach and RoHs conformity Self-powered protective relay - The solution provides protection against phase-to-phase faults and earth faults.- The solution is a self-powered relay, energized by the current sensors; it does not require any auxiliary source.It actuates a Mitop release. Phase protection The phase protection has two separately adjustable settings:- the low setting may be chosen with definite time or IDMT. The IDMTcurves are in compliance with the IEC255-3 standard. They are of the standard inverse, very inverse and extremely inverse types. The low setting may also be used with the RI curve.- the high setting is of the definite time type. Earth protection The earth fault protection operates by residual currentmeasurement: it uses the sum of the sensor secondary currents. Like phase protection, earth protection has two separately adjustable settings.