Browse FAQs

RealFLO: Input Limit Ranges for Liquid Flow Run Calculations

Published date: 23 December 2019

For RealFLO liquid flow run calculations, API Chapter 11.1 (section 11.1.2.3) and API Chapter 11.2.4 (section 2) specify limits for the inputs; specifically:
  • Base density Ranges

  • Flowing density Input Ranges

  • Temperature Input Ranges

  • Gage Pressure Input Ranges

If any of these inputs are out of range, the following alarm message may appear in RealFLO:





 

To ensure the inputs are in the proper ranges, refer to the following 4 tables which denote the proper ranges for each product type:

 

Base Density Ranges




 

Flowing Density Input Ranges




 

Temperature Input Ranges




 

Gage Pressure Input Ranges



 

The tables above may also be found in the RealFLO Documentation Set in the following location:

Realflo Documentation Set | Expert Mode | Appendix C: Liquid Flow Calculation Ranges



 

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.