Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
View all   Modicon Momentum
171CCS70000 Product picture

171CCS70000

171CCS70000 Product picture
171CCS70000

M1/M1E processor adaptor - 1 Modbus - 20 MHz

Show more characteristics
The maximum number of products that can be compared is 4. Remove already added products.

  • Main
    range of product
    Modicon Momentum automation platform
    product or component type
    M1/M1E processor adaptor
    software designation
    Concept version V2.6
    Modsoft version >= V2.5
    ProWORX NxT version V2.0
    ProWORX 32
    communication port protocol
    Modbus
    processor name
    X 86 based (INTEL, AMD)
    clock frequency
    20 MHz
    Complementary
    discrete I/O processor capacity
    2048 I/2048 O
    memory type
    256 kB flash
    64 kB RAM
    memory description
    Program memory 2.4 kB LL984
    Data 2 kB
    material
    Lexan
    word length
    16 bit
    [Us] rated supply voltage
    5.0 V DC +/-5 %
    supply
    By Momentum I/O base
    exact time for 1 Kinstruction
    1 ms
    register I/O processor capacity
    2048 I/2048 O
    number of port
    1 RS232C non isolated
    marking
    CE
    net weight
    0.042 kg
    Environment
    protective treatment
    TC
    ambient air temperature for operation
    0…60 °C
    ambient air temperature for storage
    -40…85 °C
    relative humidity
    5…96 % without condensation
    operating altitude
    2000 m
    shock resistance
    <= 15 gn peak 11 ms half sine wave acceleration
    vibration resistance
    0.75 mm d.a
    1 gn
    product certifications
    UL
    CUL
    FM Class 1 Division 2
    Nema type 250
    Packing Units
    Package 1 Weight
    0.206 kg
    Package 1 Height
    55.000 mm
    Package 1 width
    180.000 mm
    Package 1 Length
    260.000 mm
    Contractual warranty
    Warranty
    18 months
  • View more View less

    Documents

    Language
    • English1
    User guide
    Format
    Size
    Date
    Add to My Documents
    171CCC... / 171CCS... M1 Processor Adapter and Option Adapter (Version 10)
    Description
    This manual contains complete information about the Momentum M1 processor adapters, option adapters and Ethernet adapters. It does not contain information about Momentum I/O bases or communication adapters.
    prp.document.label.format pdf
    Size 3.6 MB
    Date 1/4/10
    Description
    This manual contains complete information about the Momentum M1 processor adapters, option adapters and Ethernet adapters. It does not contain information about Momentum I/O bases or communication adapters.
  • View more View less

    Software and Firmware

    Language
    • English1
    Firmware
    Format
    Size
    Date
    Add to My Documents
    171CCS70000 Momentum M1 984LL Exec.(2/26/03) (Version V2.07)
    Files in document
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    Description
    Exec. v.2.07 (m1llv207.bin)1) Fixes a 40xxx register value setting to zero on a start command.Exec. v.2.06 (m1llv206.bin)1) Minimum Exec. required for M1 171CCS76000 processors at PV02.Exec. v.2.05 (m1llv205.bin)1) Fixes problem in Exec. v.2.04 where M1 would not go into Run.2) The processor will not go into a not configured state after a power cycle if a battery low condition exists (less than 2.68 volts). 3) Fixes XMIT Function Block operation over 2-wire RS485.Exec. v.2.04 (m1llv204.bin)EXEC. v.2.04 WILL NOT WORK IN M1 PROCESSORS. Putting a program into Run mode causes the Run LED to flash in a pattern of 4. It has been removed from the Exec. listing. Refer to Resolution #1096.Exec. v.2.03 (m1v203.bin) 1) Allows the I/O Bus to be more tolerant of PCP devices (example:ATV58) on the network. Exec. v.2.02 (m1exv202.bin) 1) Changes the response of 4 bi-directional IO Bases in the event of an output fault 2) Allows IO Bus network fault monitoring. Exec. v.2.01 (m1ev201.bin) 1) Fixes M1 processors failing with stopped error code 4 when doing online programming changes. Exec. v.2.00 (m1exe200.bin) 1) The XMIT function block is included in the exec. 2) Allows ASCII read & write
    prp.document.label.format zip
    Size 1.3 MB
    Date 27/2/03
    Files in document
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    bin
    192 KB
    Description
    Exec. v.2.07 (m1llv207.bin)1) Fixes a 40xxx register value setting to zero on a start command.Exec. v.2.06 (m1llv206.bin)1) Minimum Exec. required for M1 171CCS76000 processors at PV02.Exec. v.2.05 (m1llv205.bin)1) Fixes problem in Exec. v.2.04 where M1 would not go into Run.2) The processor will not go into a not configured state after a power cycle if a battery low condition exists (less than 2.68 volts). 3) Fixes XMIT Function Block operation over 2-wire RS485.Exec. v.2.04 (m1llv204.bin)EXEC. v.2.04 WILL NOT WORK IN M1 PROCESSORS. Putting a program into Run mode causes the Run LED to flash in a pattern of 4. It has been removed from the Exec. listing. Refer to Resolution #1096.Exec. v.2.03 (m1v203.bin) 1) Allows the I/O Bus to be more tolerant of PCP devices (example:ATV58) on the network. Exec. v.2.02 (m1exv202.bin) 1) Changes the response of 4 bi-directional IO Bases in the event of an output fault 2) Allows IO Bus network fault monitoring. Exec. v.2.01 (m1ev201.bin) 1) Fixes M1 processors failing with stopped error code 4 when doing online programming changes. Exec. v.2.00 (m1exe200.bin) 1) The XMIT function block is included in the exec. 2) Allows ASCII read & write
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.