TeSys T - Use in Explosive Atmospheres

This document provides essential safety and compliance information for using TeSys T Motor Management System with LTM R controllers in explosive atmospheres for Zones 1-2 and 21-22. It covers general rules of use, startup procedures, configuration requirements including thermal overload protection settings, and maintenance guidelines. The document specifies that products must be installed outside Ex zones and are qualified for protection of motors in explosive environments. It references EU-Type Examination Certificate INERIS 08ATEX0011X and UK-Type Examination Certificate CML 21UKEX7333X. Installation, configuration, and maintenance must be performed by qualified personnel in accordance with applicable standards including EN/IEC 60079-14, 60079-17, 60364, and harmonised standard 50495. The document includes warnings about proper motor protection configuration and emergency restart procedures following motor overload trips. Note: AI-generated document summary. Please check the original document for detailed information.