If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Question

Accepted Answer

If using a display remote device, a long reset (>5s) is enough.If using a LED remote device, the configuration SW is mandatory.

If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Publikované pre: Schneider Electric Slovakia

Produkty

Podpora

Spoločnosť

Rýchle odkazy

Partneri

Udržateľnosť

Podujatia

Poznatky
opens new tab