{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}

Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Was this helpful?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}
Search FAQs

How do I use the Network Management Card to retrieve Event, Data, and Config Files on an InRow.

How do I use the Network Management Card to retrieve Event, Data, and Config Files on an InRow
Product line:
All InRow Cooling units
Data Center Cooling

Retrieving Event Log

1) Open a command prompt.



2) Type “ftp <ip address>” on the command prompt line and press Enter.



3) Log in using Username and Password on their respective lines and press Enter. (Username and Password are typically “apc”). NOTE: Password will not display on screen when typed.




4) At ftp> type “get event.txt” and press Enter. (Also retrieve event.txt, data.txt, and config.ini)



5) This first step is completed.  Now the file will be retrieved and the connection closed.



6) Locate event.txt in your Documents and Settings folder on your C:\ drive.  Once the file is located, you may open the document to review.



7) At ftp> type “bye” and press Enter.  This will log you out of the session.   You will need to follow the same steps 1-6 to retrieve the Config.ini and the Data.txt files.

Explore more

Can't find what you are looking for?

Reach out to our Customer Care team to receive information on technical support, assistance for complaints and more.
Explore more