Our Brands

Impact-Company-Logo-English Black-01-177x54

Welcome to the Schneider Electric Website

Welcome to our website.
		
Varlogic NR6 & NR12 User manual

please find Varlogic NR6 & NR12 Power Factor Controller User manual as file attached

What is the Tightening Torque on the Compact NSX for Lugs or Bars?

Tightening Torque on the Compact NSX for Lugs or Bars has a separated Tightening Torque for NSX100, NSX160/250 and NSX400/630. Please find the table below for Tightening Torque on the Compact NSX .

Register list for Powerlogics PM2000 series

Please find the Register list for PM2000 series as attachment below. PM2000 Series Register List

What is the meaning of I2t ON (Max resettable time) and I2t OFF (Max break...

Short-time protection - The short-time protection function protects the distribution system against impedant short-circuits. - The short-time tripping delay can be used to ensure discrimination with...

Tripping curves - Acti 9 breakers

The following curves show the total fault current breaking time, depending on its amperage. For example: based on the curve on page 3, an iC60 circuit breaker of curve C, 20 A rating, will interrupt...

Motor Mechanism (MCH) Instruction Manual sheets (Compact NSX 100-630)

You could find instruction sheets for Motor Mechanism (MCH) for Compact NSX 100-630 as attachments.

VIDEO: Testing Citect Credentials Fail for Application Services Host

Issue A users credentials fail to authenticate in Application Configuration Utility > Application Services Host: Citect connection unavailable. Note: Citect runtime must be running to perform this...

What is the power dissipation or heat dissipation values for the Easypact...

The power dissipation or heat dissipation values for the Easypact range of MCCBs is as provided in the table below. What is the power dissipation and resistance value (per pole) for Easypact CVS...

Show more
Popular Video FAQsPopular Videos
Show more
Learn more through our Generic Knowledge FAQsGeneral Knowledge
What is the difference between in-sync and in-phase?

There is often confusion between the in-phase and the In-sync features of ASCO transfer switches. It is important to understand the difference between these features especially during the process of...

What is the selection criterion of Circuit Breakers for the Capacitor bank...

The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase nominal current up to 1.5In. The Derating...

  • Products Documentation
  • Software Downloads
  • Product Selector
  • Product Substitution and Replacement
  • Help and Contact Center
  • Find our Offices
  • Get a Quote
  • Where to buy
  • Schneider Electric Community
  • Careers
  • Company Profile
  • Report a misconduct
  • Accessibility
  • Investors
  • EcoStruxure
  • Job Search
  • Blog
  • Privacy Policy
  • Cookie Notice
  • Terms of use
  • Change your cookie settings