{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}
{}

Welcome to the Schneider Electric Website

Welcome to our website.
 

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais

How does the Earth Fault protection work in Micrologic 6.0 when Neutral CT...

When the Neutral CT is not connected, the Earth Fault protection still operates in Micrologic 6.0 trip unit as it works on the principal of vectorial sum calculation of 3 phases. In case of Earth...

Setting ATV310 drive running immediately after switch on the power supply?

Setting step by step Instruction of parameter setting as requirement -For the parameter configuration; 1) Press mode button 3 sec then 3 LED on left side would up/down and flashing => operation...

What's meaning Degrees of protection provided by enclosures IP Protection...

The European standard EN 60529 dated October 1991, IEC publication 529 (2nd edition - November 1989), defines a coding system (IP code) for indicating the degree of protection provided by electrical...

What is the difference between XBTZ925 cable and XBTZG925 cable.

Following are the difference between XBTZ925 cable and XBTZG925 cable: 1. XBTZ925A and XBTZ925B, in connection with TSX CUSB45 converter, is used for programming HMI terminals: XBT N/R. 2....

Popular Video FAQsPopular Videos

Learn more through our Generic Knowledge FAQsGeneral Knowledge

What is the part number of the cable used for communication between...

TSXSCPCM4030 cable is required from TSXSCP114 PCMCIA card to the Modbus branching device TSXSCA50 for connecting other RS485 device on the Modbus Network. In case TSXSCA50 Modbus branching device...

Can't find what you are looking for?

Reach out to our Customer Care team to receive information on technical support, assistance for complaints and more.