Main range compatibilityLexium 32i product or component typeServo motor with power stage device short nameBMI Complementary maximum mechanical speed6000 rpm [Us] rated supply voltage208...480 V - 15...10 % supply voltage limits208…480 V network number of phasesThree phase supply frequency50/60 Hz - 5...5 % network frequency limits47.5…63 Hz EMC filterIntegrated continuous output current4 A at 8 kHz output current 3s peak12 A at 400 V for 3 s continuous stall current4 A continuous stall torque8.5 N.m at 208...480 V three phase peak stall torque19.2 N.m at 400 V three phase19.2 N.m at 480 V three phase19.2 N.m at 208 V three phase nominal output power1000 W at 208 V three phase2000 W at 400 V three phase2100 W at 480 V three phase nominal torque7.2 N.m at 208 V three phase6.8 N.m at 400 V three phase5.6 N.m at 480 V three phase nominal speed1500 rpm at 208 V three phase3000 rpm at 400 V three phase3700 rpm at 480 V three phase maximum current Irms26.7 A at 208 V, three phase26.7 A at 400 V, three phase26.7 A at 480 V, three phase product compatibilityDrive control unit LXM32i CANopenDrive control unit LXM32i EtherCAT shaft endUntapped second shaftWithout second shaft end shaft diameter19 mm shaft length40 mm feedback typeAbsolute single turn SinCos Hiperface speed feedback resolution32768 points/turn holding brakeWith holding torque9 N.m holding brake mounting supportInternational standard flange motor flange size100 mm electrical connectionPrinted circuit board connector torque constant1.7 N.m/A at 20 °C back emf constant112 V/krpm at 20 °C number of motor poles10 rotor inertia10.3 kg.cm² stator resistance2.31 Ohm at 20 °C stator inductance11.43 mH at 20 °C stator electrical time constant4.95 ms at 20 °C maximum radial force Fr1050 N at 1000 rpm830 N at 2000 rpm730 N at 3000 rpm660 N at 4000 rpm610 N at 5000 rpm maximum axial force Fa0.2 x Fr brake pull-in power8 W type of coolingNatural convection length338 mm number of motor stacks3 centring collar diameter95 mm centring collar depth3.5 mm number of mounting holes4 mounting holes diameter9 mm circle diameter of the mounting holes115 mm distance shaft shoulder-flange3.5 mm Environment IP degree of protectionShaft: IP54Housing: IP65 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 10.1 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i ETH + BMi.prp.document.label.format pdfSize 11.1 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i CAN + BMi.CertificateFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
Technical FAQsNo results found.