Current transformer T1

These current transformers from Schneider Electic are a comprehensive offer, ideally suited for use throughout entire low voltage field, from 40A to 6000A. They deliver at the secondary a current (0-5 A) proportional to the current measured at the primary; they can be used in combination with measurement devices (switchboard instrumentation, kilowatt-hour meters, power-monitoring units, etc.)

Primary current can be measured in two ways:

• CT with let-through primary
• CT with connection of primary by screw and nut

The PowerLogic range of CTs is a comprehensive range suited to:

• all current measurements from 40A to 6000A.

• DIN rail, flush-mounted and busbar installation

The CT current transformers deliver at the secondary a current (0-5 A) proportional to the current measured at the primary. This means that they can be used in combination with measurement devices (switchboard instrumentation, kilowatt-hour meters, power-monitoring units, etc.)