If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other…

Size bugün nasıl yardımcı olabiliriz?

If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

If using a display remote device, a long reset (>5s) is enough.If using a LED remote device, the configuration SW is mandatory.

Yayımlanma amacı: Schneider Electric Turkey

Yayımlanma tarihi:01.09.2015Son Değiştirme tarihi:29.09.2021

Yayımlanma amacı: Schneider Electric Turkey

Ürünler

Destek

Şirket

Hızlı Bağlantılar

İş Ortakları

Sürdürülebilirlik

Etkinlikler

Bilgi
opens new tab