返回   無線數據傳輸器


      • QR150 | QR450 Half Duplex Radio
        Trio™ Q Data Radios are advanced, high-speed licensed digital data radios, providing both Ethernet and serial communications for complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.

        Features such as ChannelShare+™ and web-based user configuration, together with powerful remote diagnostics and Network Management, make Trio Q Data Radios the complete licensed radio solution that works with leading host systems and remote equipment.

        Combining both Ethernet and serial connectivity, Trio Q Data Radios are suitable for use with the latest SCADA technology and for providing a smooth transition from serial-based infrastructure to IP/Ethernet.

        Ideal for deployment at remote sites, the QR Half Duplex Radio supports Simplex or Half duplex operation. Where base stations or hot-standby radios are required, please refer to the QB (Full Duplex Base), QP (Half Duplex Hot Standby) and QH (Full Duplex Hot Standby) radios.
      • VHF Frequency Band Operation: 135-175 MHz
      • UHF Frequency Band Operation : 400-450MHz and 450-518MHz
      • 12.5kHz and 25kHz channel operation in one radio model
      • User configurable transmitter output power up to 10 Watts
      • Coverage of common international frequency bands
      • Designed to meet international FCC & ETSI radio regulatory requirements
      • VSWR and over temperature protection
      • Operation over full -40°C to +70°C ambient temperature range
      • Automatic frequency offset compensation for years of service/calibration free operation
      • Ethernet
      • Transport of Ethernet/IP based protocols (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
      • Layer-2 Ethernet Bridge Mode & Layer-3 IP Router mode
      • Maximum narrowband channel utilization with smart peer-to-peer repeating, broadcast filtering and data compression
      • Network Address Translation for static NAT port forwarding
      • VLAN 802.1Q capable
      • SNMP access to radio diagnostics parameters (including alarm generation
        via traps)
      • Legacy RS-232 serial support via embedded terminal servers (UDP/TCP)
        and MODBUS/TCP gateway
      • Configuration via embedded HTTP, HTTPS web interface and/or
        Telnet/SSH/Serial console
      • Local and (one to N) broadcast firmware upgrades
      • Modem
      • Dynamic Speed Selection: QoS/RSSI based automatic speed selection
        (or fixed mode)
      • RF Data Rates: Up to 32kbps in a 12.5kHz Channel & 56kbps
        in a 25kHz ETSI Channel
      • ChannelShare+™: Advanced dynamic supervisory collision avoidance system
      • Compatible with the Trio E-Series and Trio M-Series Data radios (UHF only)
      • Security
      • Support for 256-bit AES encryption
      • Multi-User password-protected HTTP and HTTPS configuration/diagnostics management interface
      • Multi-User Password-protected Telnet, SSH and Serial console interface
      • Diagnostics
      • Compatible with the Trio TVIEW+™ Diagnostics Network Management Software
      • Embedded error rate testing facilities
      • Diagnostics parameters available for Tx Power, RSSI, DC Supply Volts, Frequency Offset, Temperature and VSWR
      • Embedded event and performance logs including time stamped data statistics and channel occupancy
      • Approvals
      • Europe (ETSI) : ETSI EN300 113, EN 301 489, EN 60950, EN 50385 and EN 50383
      • FCC (North America) : FCC Part 15, Part 90
      • Industry Canada : IC RS119, ICES-001
      • Australia : ACMA AS4295-2004 (Data)
      • Hazardous : CSA Class I, Division 2, Groups A,B,C & D for Hazardous Locations ANSI/UL equivalent
      • Half Duplex Radio QR150 | QR450
      • Simplex or Half duplex operation
      • Rugged die cast housing
      • QR150: 115 x 56 x 164mm
      • QR450: 115 x 34 x 164mm
      • 10-30 V DC supply voltage
      • DIN Rail Mounting Kit Option
      • Digital Inputs & Outputs (QR150 only)