Thalassa PLA

Polyester floor-standing enclosures - Floor Standing GRP Enclosures


Thalassa PLA
  • Features

    Floor-Standing polyester enclosures & accessories

    All parts are made of fiber glass reinforced polyester, moulded by hot compression, RAL7035 colour. Same finish for all surfaces. Bosses for fixation points are moulded.

    4 versions of enclosures available:

    • Totally closed, IP65.
    • Open bottom and integrated plinth, IP54.
    • With ventilated canopy, IP44.
    • Open bottom with plinth, and ventilated canopi, IP44.


    • 40 dimensions from 500x500x320mm up to 1500x1250x420mm and also 2000x750x420mm.
    • 1 door: for 500 and 750mm width enclosures
    • 2 doors: for 1000 and 1250mm width enclosures
    • 2 doors: for 2000mm height enclosures


    • 2 doors enclosures constructed with reinforcement in central part.
    • 3 types of panels/doors: plain, ribbed and glazed.
    • Lock or handle with locks, with 2 or 4 action points out of the protected volume.
    • Impact resistance: IK10 for plain and ribbed door version, IK08 for the glazed door.
    • Self-extinguish: HB40
    • 960ºC test withstanding.
    • Polyester plinth ZA 200 mm, stackable 2x200mm for PLA enclosures, closed bottom versions
    • Polyester plinth ZZ 200 mm and 500 mm for PLA enclosures, open bottom versions


    • Bureau Veritas and DEKRA - IEC62208 enclosure standard.
    • Bureau Veritas - Marine applications
    • UL508A – CAN/CSA-C22.2 (Only for NSYPLA) 


    Floor-standing polyester enclosure

    • No electrical contact risks.
    • Suitable for indoor or outdoor use.
    • Resistant to harsh atmospheres.
    • Can be used in a large temperature range.
    • Easy to machine and the machining does not produce corrosion.
    • Halogen free.
    • Light weight gives an easy installation.
    • Long life lasting without maintenance.
    • Strong against shocks.
    • Version with canopy , for outdoor use, maintaining the quality of the seal.
    • Version with 65mm integrated plinth and open lower part for easy incoming of cables.
    • Large range of dimensions (40 dimensions !).
    • Choice of doors (plain, ribbed anti flyposting surface, glazed).
    • Several possibilities of installation (ground, on plinth, wall).
    • Coupling possibilities thanks to modular dimensions.
    • Locking system is out the protected volume.
    • Abroad number of composition accessories.
    • Mounting plates (metal or insulating material) or chassis for universal use or applications (VDI, modular distribution).
    • Customised service: colour, machining, mounting accessories, change of locks, depth enhanced depth.
    • Combination of the 4 versions with the 3 types of door and rear door instead of panel.


    • Energy distribution and Control in Energy Infrastructures, industry markets, installed indoor or outdoor, harsh conditions or environments and to avoid electrical risks.


    • Glazed door & Upper opening for ventilation
    • Horizontal, vertical and depth coupling
    • Polyester floor standing enclosures
    • 200 mm plinth
Compare products: /